[PATCH v4 2/4] mfd: lubbock_cplds: add lubbock IO board

Lee Jones lee.jones at linaro.org
Mon Feb 16 23:43:10 PST 2015


Arnd, Greg,

  Perhaps you have some ideas WRT programmables (PLDs/CPLDs/FPGAs)?

On Mon, 16 Feb 2015, Robert Jarzmik wrote:
> Lee Jones wrote:
> > What's all this?  Please configure your mail client correctly.
> >
> > For advice, see:
> >
> >   Documentation/email-clients.txt
> While at day work, I have only access to web mail ...

Probably best to hold off your reply until you get home then.  It's
not just a formatting issue, you also exposed many raw email addresses
to the internet, which are easily harvested up by web crawlers.

See this:
  https://lkml.org/lkml/2015/2/16/247

> >>  2) after v2, we _both_ agreed that the accurate name is "cplds"
> >>     which exactly what is in this patch
> >>     (see device registering with lubbock_cplds).
> >
> > There is no mention of this decision in the changelogs.  If it's not
> > in the change logs, it didn't happen. ;)
> Ah right.
> 
> > I'm still concerned with the fact that the driver file is named using
> > and is populated by lots of instances of a "board" name.  I'm sure you
> > would share my thoughts is someone submitted a driver called
> > beaglebone.c or raspberrypi.c to MFD.
> I understand your concern. Arnd, a thought about it ? The only viable
> alternative would be to move it to arch/arm/plat-pxa AFAIS.

I don't think this is correct either.  CPLD handling would probably be
slightly less out of place in drivers/misc, but perhaps a new
subsystem for PLDs/CPLDs/FPGAs would be more appropriate
drivers/programmables or similar maybe.

> >> > Besides, this is MFD, where we support single pieces of silicon which
> >> > happen to support multiple devices.  I definitely don't want to support
> >> > boards here.
> >> > You might want to re-think the naming and your (sales) pitch.
> >> I might need help. As for the (sales), no comment.
> >
> > By pitch, I mean to convince me that this belongs in MFD.
> I've been trying.

I'm pretty convinced that it doesn't belong in MFD now, but it doesn't
mean I'm going to leave you on the curb.  I'd like to help you get it
into a better home.

[...]

> > Understanding was lost when I learned that the whole file was centred
> > around the premise of board support.  I understand now that this is a
> > driver for a CPLD, which I'm not sure is even MFD.  Also, if it is
> > really a CPLD driver, shouldn't be named after the manufacturer/model
> > number of the chip, rather than the PCB which it's connected to?
> >
> > I'm also concerned that this driver has no functional CPLD code
> > contained.  All you're doing is defining an IRQ domain.  Why then
> > isn't this really an drivers/irqchip (Suggested-by: Josh Cartwright)
> > driver?
> Is not only a irqchip because, as explained at the bottom of the commit message,
> quoting myself :
>   This patch moves all that handling to a mfd driver. It's only purpose
>   for the time being is the interrupt handling, but in the future it
>   should encompass all the motherboard CPLDs handling :
>    - leds
>    - switches
>    - hexleds

I had a conversation about this on IRC yesterday and some good
points/questions were posed.  This is a difficult area, because you
can program these things to do whatever you like.  Depending on the
'intention' (and it is only an intention -- someone else can come
along and reprogram these devices on a whim), the CPLD code could live
anywhere.  If you wanted to put watchdog functionality in there, then
there is an argument for it to live in drivers/watchdog, etc etc.  So
just because the plan is to support a few (i.e. more than one) simple
devices, it doesn't necessarily mean that the handling should be done
in MFD.

Yesterday I was asked "Are you wanting to restrict drivers in
drivers/mfd to those that make use of MFD_CORE functionality?".  My
answer to that was "No, however; I only want devices which
_intrinsically_ operate in multiple subsystems", which these
programmables no not do.

FYI, you're not on your own here.  There is at least one of these
devices in the kernel already and upon a short inspection there
appears to be a number of Out-of-Tree (OoT) drivers out there which
will require a home in Mainline sooner or later.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list