[PATCH 6/6] pm: at91: remove the at91_xxx_standby() function definitions
Wenyou Yang
wenyou.yang at atmel.com
Wed Feb 11 18:49:37 PST 2015
Because the the suspend to standby mode uses the sram function,
these functions will not be used.
Remove the data member at91_xxx_standby() of struct ramc_ids.
Substitue at91_pm_suspend() for at91_xxx_standby() assigned to at91_cpuidle_device.
Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
arch/arm/mach-at91/pm.c | 35 +++++++----------
arch/arm/mach-at91/pm.h | 97 -----------------------------------------------
2 files changed, 14 insertions(+), 118 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 722f921..9075b41 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -42,7 +42,6 @@ static struct {
int memctrl;
} at91_pm_data;
-static void (*at91_pm_standby)(void);
void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
@@ -217,19 +216,22 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
-void at91_pm_set_standby(void (*at91_standby)(void))
+static void at91_cpuidle_set_suspend(void (*at91_suspend)(void))
{
- if (at91_standby) {
- at91_cpuidle_device.dev.platform_data = at91_standby;
- at91_pm_standby = at91_standby;
- }
+ if (at91_suspend)
+ at91_cpuidle_device.dev.platform_data = at91_suspend;
+}
+
+static void at91_cpuidle_suspend(void)
+{
+ at91_pm_suspend(PM_SUSPEND_STANDBY);
}
static struct of_device_id ramc_ids[] = {
- { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
- { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
- { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
- { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+ { .compatible = "atmel,at91rm9200-sdramc" },
+ { .compatible = "atmel,at91sam9260-sdramc" },
+ { .compatible = "atmel,at91sam9g45-ddramc" },
+ { .compatible = "atmel,sama5d3-ddramc" },
{ /*sentinel*/ }
};
@@ -238,28 +240,17 @@ static void at91_dt_ramc(void)
struct device_node *np;
const struct of_device_id *of_id;
int idx = 0;
- const void *standby = NULL;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
at91_ramc_base[idx] = of_iomap(np, 0);
if (!at91_ramc_base[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
- if (!standby)
- standby = of_id->data;
-
idx++;
}
if (!idx)
panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
-
- if (!standby) {
- pr_warn("ramc no standby function available\n");
- return;
- }
-
- at91_pm_set_standby(standby);
}
static void __init at91_pm_sram_init(void)
@@ -314,6 +305,8 @@ static void __init at91_pm_init(void)
{
at91_pm_sram_init();
+ at91_cpuidle_set_suspend(at91_cpuidle_suspend);
+
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 4eef436..d7def22 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM
#include <asm/proc-fns.h>
-
#include <mach/at91_ramc.h>
#define AT91_PM_MEMTYPE_MASK 0x0f
@@ -23,100 +22,4 @@
#define AT91_PM_SLOW_CLOCK 0x01
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list