[PATCH v3 0/5] Introducing the Alpine platform.

[Tsahee Zidenberg]

Thank you!
will do.

On 2 February 2015 at 14:24, Maxime Coquelin <maxime.coquelin at st.com> wrote:
> Hi Tsahee,
>
> On 02/02/2015 12:20 PM, Tsahee Zidenberg wrote:
>>
>> Annapurna Labs(TM) is a technology company providing innovative solutions
>> including chips, software, and systems for the datacenter and enterprise
>> infrastructure.
>>
>> Alpine(TM) is one of Annapurna Labs’ chip products targeting storage and
>> networking applications. It is a complete Platform-On-Chip,
>> integrating 2-4 cortex-A15 cores and multiple innovations to provide
>> a seamless networking and storage fabric for enterprise and datacenter
>> equipment.
>>
>> This patchset provides initial support for the Alpine platform.
>>
>> Patch #1 contains minimal, single-cpu architecture support.
>>
>> Patch #2 adds early-debug capabilities via Alpine UART 0.
>>
>> Patch #3 adds smp-support and a secondary cpu enable-method for the
>> platform.
>>
>> Patch #4 provides documentation for the available device-tree nodes.
>>
>> Patch #5 provides a device-tree for Alpine soc and development board.
>>
>> The patchset was tested with multi_v7_defconfig, adding CONFIG_ARCH_ALPINE
>>
>> ---
>> V2:
>> * map physical cpu-id from logical on cpu wakeup
>> * use syscon/regmap for sysfabric_service implementation
>> * devicetree format:
>> **  split between .dtsi and dts
>> **  dual license
>> **  node and manufacturer naming
>> * intoduce devicetree in two separate patches
>> * multiple format fixes
>> * rebased on d932006 (for-next)
>>
>> ---
>> V3:
>> * small format changes
>> * rebased on f9db7e2 (for-next)
>>
>> Tsahee Zidenberg (5):
>>    ARM: Alpine: Initial support for Alpine platform
>>    ARM: Alpine: early-debug print support
>>    ARM: Alpine: smp support
>>    ARM: dts: Alpine platform binding documentation
>>    ARM: dts: Alpine platform devicetree
>>
>>   .../devicetree/bindings/arm/al,alpine.txt          |  88 +++++++++++++
>>   .../bindings/arm/cpu-enable-method/al,alpine-smp   |  52 ++++++++
>>   .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>>   arch/arm/Kconfig                                   |   2 +
>>   arch/arm/Kconfig.debug                             |  12 +-
>>   arch/arm/Makefile                                  |   1 +
>>   arch/arm/boot/dts/Makefile                         |   4 +
>>   arch/arm/boot/dts/alpine-db.dts                    |  35 +++++
>>   arch/arm/boot/dts/alpine.dtsi                      | 141
>> +++++++++++++++++++++
>>   arch/arm/mach-alpine/Kconfig                       |  10 ++
>>   arch/arm/mach-alpine/Makefile                      |   6 +
>>   arch/arm/mach-alpine/alpine_cpu_pm.c               |  70 ++++++++++
>>   arch/arm/mach-alpine/alpine_cpu_pm.h               |  26 ++++
>>   arch/arm/mach-alpine/alpine_cpu_resume.h           |  38 ++++++
>>   arch/arm/mach-alpine/alpine_machine.c              |  28 ++++
>>   arch/arm/mach-alpine/platsmp.c                     |  49 +++++++
>>   16 files changed, 562 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/arm/al,alpine.txt
>>   create mode 100644
>> Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
>>   create mode 100644 arch/arm/boot/dts/alpine-db.dts
>>   create mode 100644 arch/arm/boot/dts/alpine.dtsi
>>   create mode 100644 arch/arm/mach-alpine/Kconfig
>>   create mode 100644 arch/arm/mach-alpine/Makefile
>>   create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.c
>>   create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.h
>>   create mode 100644 arch/arm/mach-alpine/alpine_cpu_resume.h
>>   create mode 100644 arch/arm/mach-alpine/alpine_machine.c
>>   create mode 100644 arch/arm/mach-alpine/platsmp.c
>>
> You need to add an entry in the MAINTAINERS file, so that get_maintainers.pl
> script
> adds the right guys for patch impacting your machine.
>
> Br,
> Maxime