[PATCH v4 1/6] clk: hisilicon: add CRG driver for hi3519 soc

Michael Turquette mturquette at baylibre.com
Wed Dec 30 16:23:23 PST 2015


Hello Jiancheng Xue,

Quoting Jiancheng Xue (2015-12-29 17:43:47)
> The CRG(Clock and Reset Generator) block provides clock
> and reset signals for other modules in hi3519 soc.
> 
> Signed-off-by: Jiancheng Xue <xuejiancheng at huawei.com>
> ---
>  .../devicetree/bindings/clock/hi3519-crg.txt       |  46 +++++++
>  drivers/clk/hisilicon/Kconfig                      |   7 +
>  drivers/clk/hisilicon/Makefile                     |   2 +
>  drivers/clk/hisilicon/clk-hi3519.c                 | 103 ++++++++++++++
>  drivers/clk/hisilicon/reset.c                      | 149 +++++++++++++++++++++
>  drivers/clk/hisilicon/reset.h                      |  32 +++++
>  include/dt-bindings/clock/hi3519-clock.h           |  43 ++++++
>  7 files changed, 382 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
>  create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
>  create mode 100644 drivers/clk/hisilicon/reset.c
>  create mode 100644 drivers/clk/hisilicon/reset.h
>  create mode 100644 include/dt-bindings/clock/hi3519-clock.h

Please keep Philipp Zabel Cc'd for reset-related patches. I've added
him to Cc.

> 
> diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
> new file mode 100644
> index 0000000..2d23950
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
> @@ -0,0 +1,46 @@
> +* Hisilicon Hi3519 Clock and Reset Generator(CRG)
> +
> +The Hi3519 CRG module provides clock and reset signals to various
> +controllers within the SoC.
> +
> +This binding uses the following bindings:
> +    Documentation/devicetree/bindings/clock/clock-bindings.txt
> +    Documentation/devicetree/bindings/reset/reset.txt
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> +  - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
> +
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes use this identifier
> +to specify the clock which they consume.
> +
> +All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
> +
> +- #reset-cells: should be 2.
> +
> +A reset signal can be controlled by writing a bit register in the CRG module.
> +The reset specifier consists of two cells. The first cell represents the
> +register offset relative to the base address. The second cell represents the
> +bit index in the register.
> +
> +Example: CRG nodes
> +CRG: clock-reset-controller at 12010000 {
> +       compatible = "hisilicon,hi3519-crg";
> +        reg = <0x12010000 0x10000>;
> +        #clock-cells = <1>;
> +        #reset-cells = <2>;
> +};
> +
> +Example: consumer nodes
> +i2c0: i2c at 12110000 {
> +       compatible = "hisilicon,hi3519-i2c";
> +        reg = <0x12110000 0x1000>;
> +        clocks = <&CRG HI3519_I2C0_RST>;*/
> +        resets = <&CRG 0xe4 0>;
> +};
> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
> index e434854..b6baebf 100644
> --- a/drivers/clk/hisilicon/Kconfig
> +++ b/drivers/clk/hisilicon/Kconfig
> @@ -1,3 +1,10 @@
> +config COMMON_CLK_HI3519
> +       tristate "Clock Driver for Hi3519"
> +       depends on ARCH_HISI
> +       default y
> +       help
> +         Build the clock driver for hi3519.
> +
>  config COMMON_CLK_HI6220
>         bool "Hi6220 Clock Driver"
>         depends on ARCH_HISI || COMPILE_TEST
> diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
> index 74dba31..3f57b09 100644
> --- a/drivers/clk/hisilicon/Makefile
> +++ b/drivers/clk/hisilicon/Makefile
> @@ -4,8 +4,10 @@
>  
>  obj-y  += clk.o clkgate-separated.o clkdivider-hi6220.o
>  
> +obj-$(CONFIG_RESET_CONTROLLER) += reset.o
>  obj-$(CONFIG_ARCH_HI3xxx)      += clk-hi3620.o
>  obj-$(CONFIG_ARCH_HIP04)       += clk-hip04.o
>  obj-$(CONFIG_ARCH_HIX5HD2)     += clk-hix5hd2.o
>  obj-$(CONFIG_COMMON_CLK_HI6220)        += clk-hi6220.o
>  obj-$(CONFIG_STUB_CLK_HI6220)  += clk-hi6220-stub.o
> +obj-$(CONFIG_COMMON_CLK_HI3519)        += clk-hi3519.o
> diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
> new file mode 100644
> index 0000000..e220234
> --- /dev/null
> +++ b/drivers/clk/hisilicon/clk-hi3519.c
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/of_address.h>
> +#include <dt-bindings/clock/hi3519-clock.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include "clk.h"
> +#include "reset.h"
> +
> +#define HI3519_FIXED_24M       (HI3519_EXT_CLKS + 1)
> +#define HI3519_FIXED_50M       (HI3519_EXT_CLKS + 2)
> +#define HI3519_FIXED_75M       (HI3519_EXT_CLKS + 3)
> +#define HI3519_FIXED_125M      (HI3519_EXT_CLKS + 4)
> +#define HI3519_FIXED_150M      (HI3519_EXT_CLKS + 5)
> +#define HI3519_FIXED_200M      (HI3519_EXT_CLKS + 6)
> +#define HI3519_FIXED_250M      (HI3519_EXT_CLKS + 7)
> +#define HI3519_FIXED_300M      (HI3519_EXT_CLKS + 8)
> +#define HI3519_FIXED_400M      (HI3519_EXT_CLKS + 9)
> +#define HI3519_FMC_MUX         (HI3519_EXT_CLKS + 10)
> +
> +#define HI3519_NR_CLKS 128
> +#define HI3519_NR_RSTS 128
> +
> +static struct hisi_fixed_rate_clock hi3519_fixed_rate_clks[] __initdata = {
> +       { HI3519_FIXED_3M, "3m", NULL, CLK_IS_ROOT, 3000000, },
> +       { HI3519_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
> +       { HI3519_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
> +       { HI3519_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
> +       { HI3519_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
> +       { HI3519_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
> +       { HI3519_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
> +       { HI3519_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
> +       { HI3519_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
> +       { HI3519_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
> +};
> +
> +static const char *fmc_mux_p[] __initconst = {
> +               "24m", "75m", "125m", "150m", "200m", "250m", "300m", "400m", };
> +static u32 fmc_mux_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
> +
> +static struct hisi_mux_clock hi3519_mux_clks[] __initdata = {
> +       { HI3519_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
> +               CLK_SET_RATE_PARENT, 0xc0, 2, 3, 0, fmc_mux_table, },
> +};
> +
> +static struct hisi_gate_clock hi3519_gate_clks[] __initdata = {
> +       /* fmc */
> +       { HI3519_FMC_CLK, "clk_fmc", "fmc_mux",
> +               CLK_SET_RATE_PARENT, 0xc0, 1, 0, },
> +       /* uart */
> +       { HI3519_UART0_CLK, "clk_uart0", "24m",
> +               CLK_SET_RATE_PARENT, 0xe4, 20, 0, },
> +       { HI3519_UART1_CLK, "clk_uart1", "24m",
> +               CLK_SET_RATE_PARENT, 0xe4, 21, 0, },
> +       { HI3519_UART2_CLK, "clk_uart2", "24m",
> +               CLK_SET_RATE_PARENT, 0xe4, 22, 0, },
> +       { HI3519_UART3_CLK, "clk_uart3", "24m",
> +               CLK_SET_RATE_PARENT, 0xe4, 23, 0, },
> +       { HI3519_UART4_CLK, "clk_uart4", "24m",
> +               CLK_SET_RATE_PARENT, 0xe4, 24, 0, },
> +       { HI3519_SPI0_CLK, "clk_spi0", "50m",
> +               CLK_SET_RATE_PARENT, 0xe4, 16, 0, },
> +       { HI3519_SPI1_CLK, "clk_spi1", "50m",
> +               CLK_SET_RATE_PARENT, 0xe4, 17, 0, },
> +       { HI3519_SPI2_CLK, "clk_spi2", "50m",
> +               CLK_SET_RATE_PARENT, 0xe4, 18, 0, },
> +};
> +
> +static void __init hi3519_clk_init(struct device_node *np)
> +{
> +       struct hisi_clock_data *clk_data;
> +
> +       clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
> +       if (!clk_data)
> +               return;
> +
> +       hisi_reset_init(np, HI3519_NR_RSTS);
> +
> +       hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
> +                                    ARRAY_SIZE(hi3519_fixed_rate_clks),
> +                                    clk_data);
> +       hisi_clk_register_mux(hi3519_mux_clks, ARRAY_SIZE(hi3519_mux_clks),
> +                                       clk_data);
> +       hisi_clk_register_gate(hi3519_gate_clks,
> +                       ARRAY_SIZE(hi3519_gate_clks), clk_data);
> +}
> +
> +CLK_OF_DECLARE(hi3519_clk, "hisilicon,hi3519-crg", hi3519_clk_init);

Is CLK_OF_DECLARE required here? Why do you need to register these
clocks so early?

Can this be a real platform driver instead? See,

grep platform_driver drivers/clk/qcom/*.c

Regards,
Mike

> diff --git a/drivers/clk/hisilicon/reset.c b/drivers/clk/hisilicon/reset.c
> new file mode 100644
> index 0000000..cf5c32a
> --- /dev/null
> +++ b/drivers/clk/hisilicon/reset.c
> @@ -0,0 +1,149 @@
> +/*
> + * Hisilicon Reset Controller driver
> + *
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>
> +
> +#define        HISI_RESET_BIT_SHIFT    0
> +#define        HISI_RESET_BIT_WIDTH    16
> +#define        HISI_RESET_OFFSET_SHIFT 16
> +#define        HISI_RESET_OFFSET_WIDTH 16
> +
> +struct hisi_reset_controller {
> +       spinlock_t      lock;
> +       void __iomem    *membase;
> +       struct reset_controller_dev     rcdev;
> +};
> +
> +
> +#define to_hisi_reset_controller(rcdev)  \
> +       container_of(rcdev, struct hisi_reset_controller, rcdev)
> +
> +/*31                        16                         0
> + * |---reset_spec->args[0]---|---reset_spec->args[1]---|
> + * |-------reg_offset--------|--------reg_bit----------|
> + */
> +static int hisi_reset_of_xlate(struct reset_controller_dev *rcdev,
> +                       const struct of_phandle_args *reset_spec)
> +{
> +       unsigned int offset, bit, id;
> +       const __be32 *addr;
> +       u64 size;
> +
> +       if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
> +               return -EINVAL;
> +
> +       addr = of_get_address(rcdev->of_node, 0, &size, NULL);
> +       if (!addr)
> +               return -EINVAL;
> +
> +       if (reset_spec->args[1] >= 32
> +               || reset_spec->args[0] + reset_spec->args[1] / 8 > size)
> +               return -EINVAL;
> +
> +       offset = reset_spec->args[0] & (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> +       bit = (reset_spec->args[1] & (BIT(HISI_RESET_BIT_WIDTH) - 1));
> +       id = offset << HISI_RESET_OFFSET_SHIFT | bit;
> +
> +       return id;
> +}
> +
> +static int hisi_reset_assert(struct reset_controller_dev *rcdev,
> +                             unsigned long id)
> +{
> +       struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
> +       unsigned int offset, bit;
> +       unsigned long flags;
> +       u32 reg;
> +
> +       offset = id >> HISI_RESET_OFFSET_SHIFT;
> +       offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> +       bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
> +
> +       spin_lock_irqsave(&rstc->lock, flags);
> +
> +       reg = readl(rstc->membase + offset);
> +       writel(reg | BIT(bit), rstc->membase + offset);
> +
> +       spin_unlock_irqrestore(&rstc->lock, flags);
> +
> +       return 0;
> +}
> +
> +static int hisi_reset_deassert(struct reset_controller_dev *rcdev,
> +                               unsigned long id)
> +{
> +       struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
> +       unsigned int offset, bit;
> +       unsigned long flags;
> +       u32 reg;
> +
> +       offset = id >> HISI_RESET_OFFSET_SHIFT;
> +       offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> +       bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
> +
> +       spin_lock_irqsave(&rstc->lock, flags);
> +
> +       reg = readl(rstc->membase + offset);
> +       writel(reg & ~BIT(bit), rstc->membase + offset);
> +
> +       spin_unlock_irqrestore(&rstc->lock, flags);
> +
> +       return 0;
> +}
> +
> +static struct reset_control_ops hisi_reset_ops = {
> +       .assert         = hisi_reset_assert,
> +       .deassert       = hisi_reset_deassert,
> +};
> +
> +int __init hisi_reset_init(struct device_node *np,
> +                                            int nr_rsts)
> +{
> +       struct hisi_reset_controller *rstc;
> +
> +       rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
> +       if (!rstc)
> +               return -ENOMEM;
> +
> +       rstc->membase = of_iomap(np, 0);
> +       if (!rstc->membase)
> +               return -EINVAL;
> +
> +       spin_lock_init(&rstc->lock);
> +
> +       rstc->rcdev.owner = THIS_MODULE;
> +       rstc->rcdev.nr_resets = nr_rsts;
> +       rstc->rcdev.ops = &hisi_reset_ops;
> +       rstc->rcdev.of_node = np;
> +       rstc->rcdev.of_reset_n_cells = 2;
> +       rstc->rcdev.of_xlate = hisi_reset_of_xlate;
> +
> +       return reset_controller_register(&rstc->rcdev);
> +}
> +
> diff --git a/drivers/clk/hisilicon/reset.h b/drivers/clk/hisilicon/reset.h
> new file mode 100644
> index 0000000..b04796f
> --- /dev/null
> +++ b/drivers/clk/hisilicon/reset.h
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef        __HISI_RESET_H
> +#define        __HISI_RESET_H
> +
> +#include <linux/of.h>
> +
> +#ifdef CONFIG_RESET_CONTROLLER
> +int __init hisi_reset_init(struct device_node *np, int nr_rsts);
> +#else
> +static inline int __init hisi_reset_init(struct device_node *np, int nr_rsts)
> +{
> +       return 0;
> +}
> +#endif
> +
> +#endif /* __HISI_RESET_H */
> diff --git a/include/dt-bindings/clock/hi3519-clock.h b/include/dt-bindings/clock/hi3519-clock.h
> new file mode 100644
> index 0000000..1e4a3c1
> --- /dev/null
> +++ b/include/dt-bindings/clock/hi3519-clock.h
> @@ -0,0 +1,43 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __DTS_HI3519_CLOCK_H
> +#define __DTS_HI3519_CLOCK_H
> +
> +#define HI3519_FIXED_3M                        1
> +#define HI3519_FMC_CLK                 2
> +#define HI3519_USB2_BUS_CLK            3
> +#define HI3519_USB2_PORT_CLK           4
> +#define HI3519_USB3_CLK                        5
> +#define HI3519_ETH_PHY_CLK             6
> +#define HI3519_ETH_MAC_CLK             7
> +#define HI3519_ETH_MACIF_CLK           8
> +#define HI3519_PWM_CLK                 9
> +#define HI3519_DMA_CLK                 10
> +#define HI3519_SPI0_CLK                        11
> +#define HI3519_SPI1_CLK                        12
> +#define HI3519_SPI2_CLK                        13
> +#define HI3519_IR_CLK                  14
> +#define HI3519_UART0_CLK               15
> +#define HI3519_UART1_CLK               16
> +#define HI3519_UART2_CLK               17
> +#define HI3519_UART3_CLK               18
> +#define HI3519_UART4_CLK               19
> +
> +#define HI3519_EXT_CLKS                        19
> +
> +#endif /* __DTS_HI3519_CLOCK_H */
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



More information about the linux-arm-kernel mailing list