[PATCH 2/2] pci, pcie-thunder-pem: Add PCIe host driver for ThunderX processors.

[David Daney]

On 12/22/2015 02:03 AM, Will Deacon wrote:
> On Mon, Dec 21, 2015 at 05:53:42PM -0800, David Daney wrote:
>> From: David Daney <david.daney at cavium.com>
>>
>> Some Cavium ThunderX processors require quirky access methods for the
>> config space of the PCIe bridge.  Add a driver to provide these config
>> space accessor functions.  The pci-host-generic driver code is used to
>> configure the PCI machinery.
>>
>> Signed-off-by: David Daney <david.daney at cavium.com>
>> ---
>>   .../devicetree/bindings/pci/pcie-thunder-pem.txt   |  43 ++++
>>   drivers/pci/host/Kconfig                           |   6 +
>>   drivers/pci/host/Makefile                          |   1 +
>>   drivers/pci/host/pcie-thunder-pem.c                | 283 +++++++++++++++++++++
>>   4 files changed, 333 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pci/pcie-thunder-pem.txt
>>   create mode 100644 drivers/pci/host/pcie-thunder-pem.c
>>
>> diff --git a/Documentation/devicetree/bindings/pci/pcie-thunder-pem.txt b/Documentation/devicetree/bindings/pci/pcie-thunder-pem.txt
>> new file mode 100644
>> index 0000000..66824d5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/pcie-thunder-pem.txt
>> @@ -0,0 +1,43 @@
>> +* ThunderX PEM PCIe host controller
>> +
>> +Firmware-initialized PCIe host controller found on some Cavium
>> +ThunderX processors.
>> +
>> +The properties and their meanings are identical to those described in
>> +host-heneric-pci.txt except as listed below.
>> +
>> +Properties of the host controller node that differ from
>> +host-heneric-pci.txt:
>
> Consistently odd typo (s/heneric/generic/)!
>

I'm not sure how I managed to do that.  I will fix these and resend.

>> +
>> +- compatible     : Must be "cavium,pci-host-thunder-pem"
>> +
>> +- reg            : Two entries: First the configuration space for down
>> +                   stream devices base address and size, as accessed
>> +                   from the parent bus. Second, the register bank of
>> +                   the PEM device PCIe bridge.
>> +
>> +Example:
>> +
>> +    pem2 {
>> +	compatible = "cavium,pci-host-thunder-pem";
>> +	device_type = "pci";
>> +	msi-parent = <&its>;
>> +	msi-map = <0 &its 0x10000 0x10000>;
>> +	bus-range = <0x8f 0xc7>;
>> +	#size-cells = <2>;
>> +	#address-cells = <3>;
>> +
>> +	reg = <0x8880 0x8f000000 0x0 0x39000000>,  /* Configuration space */
>> +	      <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
>> +	ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
>> +		 <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
>> +		 <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
>> +		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
>> +
>> +	#interrupt-cells = <1>;
>> +	interrupt-map-mask = <0 0 0 7>;
>> +	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
>> +			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
>> +			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
>> +			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
>> +    };
>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
>> index f131ba9..16ed9c3 100644
>> --- a/drivers/pci/host/Kconfig
>> +++ b/drivers/pci/host/Kconfig
>> @@ -172,4 +172,10 @@ config PCI_HISI
>>   	help
>>   	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
>>
>> +config PCIE_HOST_THUNDER_PEM
>> +	bool "Cavium Thunder PCIe controller to off-chip devices"
>> +	depends on PCI_HOST_GENERIC && ARM64
>
> || COMPILE_TEST ?
>
> (or does the use of writeq get you? If so, maybe COMPILE_TEST && 64BIT)

Yes, we must use writeq in the driver, I will change it to 
||(COMPILE_TEST && 64BIT)

Thanks,
David Daney


>
> Will
>