[PATCH v1 03/10] dt-bindings: document the MPS2 UART bindings

Vladimir Murzin vladimir.murzin at arm.com
Wed Dec 2 01:33:03 PST 2015


This adds documentation of device tree bindings for the
UART found on ARM MPS2 platform

Signed-off-by: Vladimir Murzin <vladimir.murzin at arm.com>
Acked-by: Rob Herring <robh at kernel.org
---
 .../devicetree/bindings/serial/arm,mps2-uart.txt   |   22 ++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/arm,mps2-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
new file mode 100644
index 0000000..b3f7cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
@@ -0,0 +1,22 @@
+ARM MPS2 UART
+
+Required properties:
+- compatible	: Should be "arm,mps2-uart"
+- reg		: Address and length of the register set
+- interrupts	: Reference to the UART RX, TX and overrun interrupts
+
+Required clocking property:
+- clocks	  : The input clock of the UART
+
+
+Examples:
+
+uart0: serial at 40004000 {
+	compatible = "arm,mps2-uart";
+	reg = <0x40004000 0x1000>;
+	interrupts = <0 1 12>;
+	clocks = <&sysclk>;
+};
+
+
+
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list