[PATCH 2/2] Convert smsc911x to use ACPI as well as DT

Graeme Gregory gg at slimlogic.co.uk
Thu Aug 13 01:27:59 PDT 2015


On Wed, Aug 12, 2015 at 05:06:27PM -0500, Jeremy Linton wrote:
> Add ACPI bindings for the smsc911x driver. Convert the DT specific calls
> to nonspecific device* calls, This allows the driver to work
> with both ACPI and DT configurations. Ethernet should now work when using
> ACPI on ARM Juno.
> 
> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>

The code looks fine to me.

Currently the compulsary DT properties seem to match the "approved" ACPI
NIC properties from here

http://www.uefi.org/sites/default/files/resources/nic-request-v2.pdf

Reviewed-by: Graeme Gregory <graeme.gregory at linaro.org>

Thanks

> ---
>  drivers/net/ethernet/smsc/smsc911x.c | 48 +++++++++++++++++-------------------
>  1 file changed, 22 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
> index 959aeea..0f21aa3 100644
> --- a/drivers/net/ethernet/smsc/smsc911x.c
> +++ b/drivers/net/ethernet/smsc/smsc911x.c
> @@ -59,7 +59,9 @@
>  #include <linux/of_device.h>
>  #include <linux/of_gpio.h>
>  #include <linux/of_net.h>
> +#include <linux/acpi.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>  
>  #include "smsc911x.h"
>  
> @@ -2362,59 +2364,46 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
>  	.tx_writefifo = smsc911x_tx_writefifo_shift,
>  };
>  
> -#ifdef CONFIG_OF
> -static int smsc911x_probe_config_dt(struct smsc911x_platform_config *config,
> -				    struct device_node *np)
> +static int smsc911x_probe_config(struct smsc911x_platform_config *config,
> +				 struct device *dev)
>  {
> -	const char *mac;
>  	u32 width = 0;
>  
> -	if (!np)
> +	if (!dev)
>  		return -ENODEV;
>  
> -	config->phy_interface = of_get_phy_mode(np);
> +	config->phy_interface = device_get_phy_mode(dev);
>  
> -	mac = of_get_mac_address(np);
> -	if (mac)
> -		memcpy(config->mac, mac, ETH_ALEN);
> +	device_get_mac_address(dev, config->mac, ETH_ALEN);
>  
> -	of_property_read_u32(np, "reg-shift", &config->shift);
> +	device_property_read_u32(dev, "reg-shift", &config->shift);
>  
> -	of_property_read_u32(np, "reg-io-width", &width);
> +	device_property_read_u32(dev, "reg-io-width", &width);
>  	if (width == 4)
>  		config->flags |= SMSC911X_USE_32BIT;
>  	else
>  		config->flags |= SMSC911X_USE_16BIT;
>  
> -	if (of_get_property(np, "smsc,irq-active-high", NULL))
> +	if (device_property_present(dev, "smsc,irq-active-high"))
>  		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
>  
> -	if (of_get_property(np, "smsc,irq-push-pull", NULL))
> +	if (device_property_present(dev, "smsc,irq-push-pull"))
>  		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
>  
> -	if (of_get_property(np, "smsc,force-internal-phy", NULL))
> +	if (device_property_present(dev, "smsc,force-internal-phy"))
>  		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
>  
> -	if (of_get_property(np, "smsc,force-external-phy", NULL))
> +	if (device_property_present(dev, "smsc,force-external-phy"))
>  		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
>  
> -	if (of_get_property(np, "smsc,save-mac-address", NULL))
> +	if (device_property_present(dev, "smsc,save-mac-address"))
>  		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
>  
>  	return 0;
>  }
> -#else
> -static inline int smsc911x_probe_config_dt(
> -				struct smsc911x_platform_config *config,
> -				struct device_node *np)
> -{
> -	return -ENODEV;
> -}
> -#endif /* CONFIG_OF */
>  
>  static int smsc911x_drv_probe(struct platform_device *pdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
>  	struct net_device *dev;
>  	struct smsc911x_data *pdata;
>  	struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
> @@ -2478,7 +2467,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
>  		goto out_disable_resources;
>  	}
>  
> -	retval = smsc911x_probe_config_dt(&pdata->config, np);
> +	retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
>  	if (retval && config) {
>  		/* copy config parameters across to pdata */
>  		memcpy(&pdata->config, config, sizeof(pdata->config));
> @@ -2654,6 +2643,12 @@ static const struct of_device_id smsc911x_dt_ids[] = {
>  MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
>  #endif
>  
> +static const struct acpi_device_id smsc911x_acpi_match[] = {
> +	{ "ARMH9118", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
> +
>  static struct platform_driver smsc911x_driver = {
>  	.probe = smsc911x_drv_probe,
>  	.remove = smsc911x_drv_remove,
> @@ -2661,6 +2656,7 @@ static struct platform_driver smsc911x_driver = {
>  		.name	= SMSC_CHIPNAME,
>  		.pm	= SMSC911X_PM_OPS,
>  		.of_match_table = of_match_ptr(smsc911x_dt_ids),
> +		.acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
>  	},
>  };
>  
> -- 
> 2.4.3
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list