[PATCH v4 0/2] ARM: at91/dt: add support for at91-kizboxmini

Gaël PORTAY g.portay at overkiz.com
Thu Apr 16 10:19:14 PDT 2015


Hi,

Here are two patches to bring support for a new hardware based on SAM9G25 SoC.

The first one adds the PIN controller definition for PWM0.
The second defines the new board.

Changes since v1:
- drop useless comments
- move pwm0 pinctrl's node close to tcb0
- drop ek boards from compatible machine
- add at91sam9g25 board to compatible machine

Changes since v2:
- update to v4.0
- fix alphabetical order between gpio_keys and pwm_leds

Changes since v3:
- add num-ports = <1> attribute to ohci node

PS: My apologies for this last minute update.

Gaël PORTAY (2):
  ARM: at91/dt: sam9x5: add pinctrl for pwm0
  ARM: at91/dt: add support for kizboxmini

 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/at91-kizboxmini.dts | 130 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/at91sam9x5.dtsi     |  46 ++++++++++++
 3 files changed, 177 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts

-- 
1.9.3




More information about the linux-arm-kernel mailing list