[PATCH v1 3/3] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board

[Shawn Guo]

On Sun, Sep 28, 2014 at 01:20:16PM +0800, Duan Fugang-B38611 wrote:
> MX6SX_PAD_ENET2_COL__GPIO2_IO_6: it is a switch which enable ENET_3V3 and 25Mhz clock for phy.
> MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16: it is a switch which enable PERI_3V3 that supply power for some modules including enet MAC and phy.
> 

So it sounds like they can be handled with fixed regulators?

Shawn