[PATCH v4 3/4] ARM: dts: vf610: use new GPIO support

[Stefan Agner]

Use GPIO support by adding SD card detection configuration and
GPIO pinmux for Colibri's standard GPIO pins. Attach the GPIO
pins to the iomuxc node to get the GPIO pin settings applied.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 arch/arm/boot/dts/vf610-colibri.dts | 9 +++++++++
 arch/arm/boot/dts/vf610-twr.dts     | 1 +
 arch/arm/boot/dts/vf610.dtsi        | 1 +
 3 files changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
index aecc7db..0599daf 100644
--- a/arch/arm/boot/dts/vf610-colibri.dts
+++ b/arch/arm/boot/dts/vf610-colibri.dts
@@ -36,6 +36,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -71,6 +72,14 @@
 
 &iomuxc {
 	vf610-colibri {
+		pinctrl_gpio_ext: gpio_ext {
+			fsl,pins = <
+				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+			>;
+		};
+
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index b8a5e8c..d0c9a09 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -117,6 +117,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
+	cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 583dd36..22cf7aa2 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -11,6 +11,7 @@
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
-- 
2.1.0