[PATCH 0/6] ARM: sunxi: Add basic support for Allwinner A80 SoC

[Chen-Yu Tsai]

Hi,

On Wed, Sep 24, 2014 at 2:41 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Hi Chen-Yu,
>
> On Sun, Sep 21, 2014 at 10:58:07PM +0800, Chen-Yu Tsai wrote:
>> Hi everyone,
>>
>> This patch series adds very basic support for Allwinner's A80 SoC,
>> a big.LITTLE architecture with 4 Cortex-A7s and 4 Cortex-A15s.
>>
>> Development is done on the A80 Optimus Board, the defacto development
>> board for the A80, with the accompanying SDK as a reference.
>>
>> So far I've been unable to get the board to boot from MMC, or
>> using Android fastboot. I'm using Allwinner's FEL mode to load
>> the bootloader and kernel+dtb image over USB. Notes on my attempts
>> can be found here: http://linux-sunxi.org/User:Wens#A80_Optimus
>
> It looks very nice, thanks a lot. You'll find a minor comments inline.
>
> One thing I forgot to ask you about when doing the A23, and that would
> nice to do is to update the documentation we have in
> Documentation/arm/sunxi/README with the A23 and A80 infos you've been
> able to gather.

I'll add the A80 datasheet in v2, and do a separate series for A23, A31,
and A31s docs.


Thanks
ChenYu