[PATCH 1/2] ARM: rockchip: add basic smp support for rk3288

Heiko Stübner heiko at sntech.de
Wed Sep 10 12:17:50 PDT 2014


Hi Kever,

Am Mittwoch, 10. September 2014, 18:05:53 schrieb Kever Yang:
> basic rk3288 smp support
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> 
>  arch/arm/mach-rockchip/core.h    |  1 +
>  arch/arm/mach-rockchip/platsmp.c | 60
> +++++++++++++++++++++++++++++++++++++--- 2 files changed, 57 insertions(+),
> 4 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
> index 39bca96..b2ade69 100644
> --- a/arch/arm/mach-rockchip/core.h
> +++ b/arch/arm/mach-rockchip/core.h
> @@ -18,3 +18,4 @@ extern char rockchip_secondary_trampoline_end;
> 
>  extern unsigned long rockchip_boot_fn;
>  extern void rockchip_secondary_startup(void);
> +extern void secondary_startup(void);
> diff --git a/arch/arm/mach-rockchip/platsmp.c
> b/arch/arm/mach-rockchip/platsmp.c index 189684f..fcd33fd 100644
> --- a/arch/arm/mach-rockchip/platsmp.c
> +++ b/arch/arm/mach-rockchip/platsmp.c
> @@ -77,6 +77,12 @@ static int __cpuinit rockchip_boot_secondary(unsigned int
> cpu, /* start the core */
>  	pmu_set_power_domain(0 + cpu, true);
> 
> +	/* wait for cpu 1~3 bootup and run into wfe state */
> +	udelay(10);
> +	writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
> +	writel(0xDEADBEAF, sram_base_addr + 4);
> +	dsb_sev();
> +

Are you sure this also works on the Cortex-A9, which do share the 
rockchip_boot_secondary function here?

This is also the area where the rk3066/rk3188 put their bringup trampoline, so 
writing new values there might break the code fragment for them.



>  	return 0;
>  }
> 
> @@ -125,7 +131,7 @@ static int __init rockchip_smp_prepare_sram(struct
> device_node *node) return 0;
>  }
> 
> -static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
> +static void __init rk3066_smp_prepare_cpus(unsigned int max_cpus)
>  {
>  	struct device_node *node;
>  	unsigned int i;
> @@ -194,12 +200,58 @@ static void rockchip_cpu_die(unsigned int cpu)
>  }
>  #endif
> 
> -static struct smp_operations rockchip_smp_ops __initdata = {
> -	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
> +static void __init rk3288_smp_prepare_cpus(unsigned int max_cpus)
> +{
> +	struct device_node *node;
> +	unsigned int i;
> +
> +	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
> +	if (!node) {
> +		pr_err("%s: could not find sram dt node\n", __func__);
> +		return;
> +	}
> +
> +	sram_base_addr = of_iomap(node, 0);
> +	if (!sram_base_addr) {
> +		pr_err("%s: could not map pmu registers\n", __func__);
> +		return;
> +	}
> +
> +	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu");
> +	if (!node) {
> +		pr_err("%s: could not find pmu dt node\n", __func__);
> +		return;
> +	}
> +
> +	pmu_base_addr = of_iomap(node, 0);
> +	if (!pmu_base_addr) {
> +		pr_err("%s: could not map pmu registers\n", __func__);
> +		return;
> +	}
> +
> +	ncores = 4;
> +
> +	/* Make sure that all cores except the first are really off */
> +	for (i = 1; i < ncores; i++)
> +		pmu_set_power_domain(0 + i, false);
> +}
> +
> +static struct smp_operations rockchip3066_smp_ops __initdata = {
> +	.smp_prepare_cpus	= rk3066_smp_prepare_cpus,
> +	.smp_boot_secondary	= rockchip_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> +	.cpu_kill		= rockchip_cpu_kill,
> +	.cpu_die		= rockchip_cpu_die,
> +#endif
> +};
> +CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp",
> &rockchip3066_smp_ops); +
> +static struct smp_operations rockchip3288_smp_ops __initdata = {
> +	.smp_prepare_cpus	= rk3288_smp_prepare_cpus,
>  	.smp_boot_secondary	= rockchip_boot_secondary,
>  #ifdef CONFIG_HOTPLUG_CPU
>  	.cpu_kill		= rockchip_cpu_kill,
>  	.cpu_die		= rockchip_cpu_die,
>  #endif
>  };
> -CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp",
> &rockchip_smp_ops); +CPU_METHOD_OF_DECLARE(rk3288_smp,
> "rockchip,rk3288-smp", &rockchip3288_smp_ops);




More information about the linux-arm-kernel mailing list