[PATCH v1] ARM: dts: imx6dl: disable dma support for spi on i.mx6dl

[Robin Gong]

On Wed, Sep 10, 2014 at 11:21:30AM +0800, Shawn Guo wrote:
> On Wed, Sep 10, 2014 at 09:33:36AM +0800, Robin Gong wrote:
> > There is one weird data in rxfifo after one full rx/tx transfer
> > done sometimes. It looks a design issue and hard to workaround
> > totally, so disable dma functhion here. And will re-enable it
> > once the root cause found.
> > 
> > Signed-off-by: Robin Gong <b38343 at freescale.com>
> > ---
> >  arch/arm/boot/dts/imx6dl.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> > index b453e0e..e84a1ff 100644
> > --- a/arch/arm/boot/dts/imx6dl.dtsi
> > +++ b/arch/arm/boot/dts/imx6dl.dtsi
> > @@ -102,6 +102,22 @@
> >  	};
> >  };
> >  
> > +&ecspi1 {
> > +	dma-names = "", "";
> > +};
> > +
> > +&ecspi2 {
> > +	dma-names = "", "";
> > +};
> > +
> > +&ecspi3 {
> > +	dma-names = "", "";
> > +};
> > +
> > +&ecspi4 {
> > +	dma-names = "", "";
> > +};
> > +
> 
> This looks odd.  Can we drop the dma properties from imx6qdl.dtsi,
> and only add them in imx6q.dtsi instead?
> 
> Shawn
>
Ok, I'll send v2.
> >  &hdmi {
> >  	compatible = "fsl,imx6dl-hdmi";
> >  };
> > -- 
> > 1.9.1
> >