[PATCH v2 0/3] ARM: dts: qcom: Add initial IFC6540 board support

[Kumar Gala]

On Sep 2, 2014, at 10:40 AM, Georgi Djakov <gdjakov at mm-sol.com> wrote:

> Add basic support for the IFC6540 single-board computer boards, that are
> based on the APQ8084 SoC. The first patch adds the initial device tree.
> The second enables the serial console. The third adds the SDHC nodes and
> enables the eMMC.
> 
> Should go through the qcom/arm-soc tree.
> 
> Changes since v1:
> - This time add linux-arm-msm list to the CC.
> - Include a third patch for enabling the eMMC.
> 
> Georgi Djakov (3):
>  ARM: dts: qcom: Add initial IFC6540 board device tree
>  ARM: dts: qcom: Enable serial port on IFC6540 boards
>  ARM: dts: qcom: Add SDHC nodes for APQ8084 platform
> 
> arch/arm/boot/dts/Makefile                 |    1 +
> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts |   23 +++++++++++++++++++++++
> arch/arm/boot/dts/qcom-apq8084.dtsi        |   23 +++++++++++++++++++++++
> 3 files changed, 47 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> 
> -- 
> 1.7.9.5
> 

Thanks, there is really no reason for these to be 3 patches, can you squash them down into one.

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation