[PATCH v2 2/5] ARM: imx6q: add BYPASS support for PLL clocks

Shawn Guo shawn.guo at freescale.com
Mon Sep 1 01:14:01 PDT 2014


The imx6q clock driver currently hard-codes all PLL clocks to source
from OSC24M without BYPASS support.  The patch adds the missing lvds_in
clock which is mutually exclusive with lvds_gate, and implements BYPASS
and BYPASS_CLK_SRC selection for PLL clocks as per Figure 10-3. Primary
Clock Generation in IMX6DQRM, i.e. both BYPASS_CLK_SRC and BYPASS bits
are implemented as mux clocks, and ENABLE bit of PLL clocks is
implemented as a gate clock after BYPASS mux.

Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c             | 67 ++++++++++++++++++++++++++-----
 include/dt-bindings/clock/imx6qdl-clock.h | 27 ++++++++++++-
 2 files changed, 83 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 2edcebf67cee..b5e18082426c 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -73,6 +73,14 @@ static const char *lvds_sels[] = {
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
 	"pcie_ref_125m", "sata_ref_100m",
 };
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
 
 static struct clk *clk[IMX6QDL_CLK_END];
 static struct clk_onecell_data clk_data;
@@ -119,6 +127,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
 	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
 	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+	/* Clock source from external clock via CLK1/2 PADs */
+	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
@@ -132,14 +143,47 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		video_div_table[2].div = 1;
 	};
 
-	/*                                             type             name         parent_name  base     div_mask */
-	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
-	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
-	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
-	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
-	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
-	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
-	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
+	clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+	/*                                    type               name    parent_name        base         div_mask */
+	clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS,     "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+	clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+	clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+	clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+	clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+	clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET,    "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+	clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+	clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+	/* Do not bypass PLLs initially */
+	clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]);
+	clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]);
+	clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]);
+	clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]);
+	clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]);
+	clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]);
+	clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]);
+
+	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_gate("pll1_sys",      "pll1_bypass", base + 0x00, 13);
+	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_gate("pll2_bus",      "pll2_bypass", base + 0x30, 13);
+	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_gate("pll3_usb_otg",  "pll3_bypass", base + 0x10, 13);
+	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_gate("pll4_audio",    "pll4_bypass", base + 0x70, 13);
+	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_gate("pll5_video",    "pll5_bypass", base + 0xa0, 13);
+	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_gate("pll6_enet",     "pll6_bypass", base + 0xe0, 13);
+	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0xe0, 13);
 
 	/*
 	 * Bit 20 is the reserved and read-only bit, we do this only for:
@@ -176,8 +220,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * the "output_enable" bit as a gate, even though it's really just
 	 * enabling clock output.
 	 */
-	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
-	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
+	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
+
+	clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
+	clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11));
 
 	/*                                            name              parent_name        reg       idx */
 	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 323e8650f198..361afd09c2b7 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -220,6 +220,31 @@
 #define IMX6QDL_CLK_LVDS2_GATE			207
 #define IMX6QDL_CLK_ESAI_IPG			208
 #define IMX6QDL_CLK_ESAI_MEM			209
-#define IMX6QDL_CLK_END				210
+#define IMX6QDL_CLK_LVDS1_IN			210
+#define IMX6QDL_CLK_LVDS2_IN			211
+#define IMX6QDL_CLK_ANACLK1			212
+#define IMX6QDL_CLK_ANACLK2			213
+#define IMX6QDL_PLL1_BYPASS_SRC			214
+#define IMX6QDL_PLL2_BYPASS_SRC			215
+#define IMX6QDL_PLL3_BYPASS_SRC			216
+#define IMX6QDL_PLL4_BYPASS_SRC			217
+#define IMX6QDL_PLL5_BYPASS_SRC			218
+#define IMX6QDL_PLL6_BYPASS_SRC			219
+#define IMX6QDL_PLL7_BYPASS_SRC			220
+#define IMX6QDL_CLK_PLL1			221
+#define IMX6QDL_CLK_PLL2			222
+#define IMX6QDL_CLK_PLL3			223
+#define IMX6QDL_CLK_PLL4			224
+#define IMX6QDL_CLK_PLL5			225
+#define IMX6QDL_CLK_PLL6			226
+#define IMX6QDL_CLK_PLL7			227
+#define IMX6QDL_PLL1_BYPASS			228
+#define IMX6QDL_PLL2_BYPASS			229
+#define IMX6QDL_PLL3_BYPASS			230
+#define IMX6QDL_PLL4_BYPASS			231
+#define IMX6QDL_PLL5_BYPASS			232
+#define IMX6QDL_PLL6_BYPASS			233
+#define IMX6QDL_PLL7_BYPASS			234
+#define IMX6QDL_CLK_END				235
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
1.9.1




More information about the linux-arm-kernel mailing list