[PATCH] ARM: xscale: correct auxiliary register in suspend/resume

[Robert Jarzmik]

Robert Jarzmik <robert.jarzmik at free.fr> writes:

> Dmitry Eremin-Solenikov <dbaryshkov at gmail.com> writes:
> ...zip...
> Acked-by: Robert Jarzmik <robert.jarzmik at free.fr>
>
> Hi Russell,
>
> Is this patch in [1] fine by you so that Dmitry can submit it to your patch system ?

OK Dmitry, let's say that Russell didn't object. Please submit it to his patch
system (with the required procedure, kernel version upon which this applies, etc
... all in [2]).

If Russell disagrees, he'll drop the patch and you'll know there is more work.

Thanks.

--
Robert

[1] The patch
>
> ---8>---
> According to the manuals I have, XScale auxiliary register should be
> reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init
> correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and
> cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to
> also use c1, c0, 1.
>
> The issue was primarily noticed thanks to qemu reporing "unsupported
> instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255
> XScale Core manuals and in PXA270 and PXA320 Developers Guides.
>
> Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board.
>
> Tested-by: Robert Jarzmik <robert.jarzmik at free.fr>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
> ---
>  arch/arm/mm/proc-xscale.S | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
> index 23259f1..afa2b3c 100644
> --- a/arch/arm/mm/proc-xscale.S
> +++ b/arch/arm/mm/proc-xscale.S
> @@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend)
>  	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
>  	mrc	p15, 0, r6, c13, c0, 0	@ PID
>  	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
> -	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
> +	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
>  	mrc	p15, 0, r9, c1, c0, 0	@ control reg
>  	bic	r4, r4, #2		@ clear frequency change bit
>  	stmia	r0, {r4 - r9}		@ store cp regs
> @@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume)
>  	mcr	p15, 0, r6, c13, c0, 0	@ PID
>  	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
>  	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
> -	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
> +	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
>  	mov	r0, r9			@ control register
>  	b	cpu_resume_mmu
>  ENDPROC(cpu_xscale_do_resume)

[2] Russell's patch system rules
http://www.arm.linux.org.uk/developer/patches/info.php