[PATCH v2 5/8] ARM: STi: STiH416: Enable PMU IRQs

[Lee Jones]

This driver is used to enable System Configuration Register controlled
External, CTI (Core Sight), PMU (Performance Management), and PL310 L2
Cache IRQs prior to use.

Here we are enabling PMU IRQs on both channels.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/stih416.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index badefd6..d98ce91 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -11,6 +11,7 @@
 #include "stih416-pinctrl.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset-controller/stih416-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
 / {
 	L2: cache-controller {
 		compatible = "arm,pl310-cache";
@@ -90,6 +91,15 @@
 			reg		= <0xfe4b5100 0x8>;
 		};
 
+		irq-syscfg {
+			compatible    = "st,stih416-irq-syscfg";
+			st,syscfg     = <&syscfg_cpu>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
 		serial2: serial at fed32000{
 			compatible	= "st,asc";
 			status 		= "disabled";
-- 
1.9.1