[PATCHv3 2/3] ARM: dts: add board dts file for Exynos3250-based Monk board
Chanwoo Choi
cw00.choi at samsung.com
Mon Nov 24 02:57:49 PST 2014
From: Youngjun Cho <yj44.cho at samsung.com>
This patch adds new board dts file to support Samsung Monk board which is
based on Exynos3250 SoC and has different H/W configuration from Rinato.
This patch is based on linux-samsung.git for-next branch and depends on
[PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board
Changes from v1:
- The 'memory' entries coalesce into one entry
- Removes useless space
- Puts voltage-regulator-0 under the root node
This dts file support following features:
- eMMC
- Main PMIC (Samsung S2MPS14)
- Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
- RTC of Exynos3250
- ADC of Exynos3250 with NTC thermistor
- I2S of Exynos3250
- TMU of Exynos3250
- Secure firmware for Exynos3250 secondary cpu boot
- Serial ports of Exynos3250
- gpio-key for power key
Signed-off-by: Youngjun Cho <yj44.cho at samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
Signed-off-by: Inki Dae <inki.dae at samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim at samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
.../devicetree/bindings/arm/samsung-boards.txt | 1 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/exynos3250-monk.dts | 579 +++++++++++++++++++++
3 files changed, 582 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
index 1f8287e..43589d2 100644
--- a/Documentation/devicetree/bindings/arm/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -2,6 +2,7 @@
Required root node properties:
- compatible = should be one or more of the following.
+ - "samsung,monk" - for Exynos3250-based Samsung Simband board.
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
- "samsung,trats" - for Exynos4210-based Tizen Reference board.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91cd4d0..0e4839e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -67,7 +67,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
+ exynos3250-rinato.dtb \
exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
new file mode 100644
index 0000000..24822aa
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -0,0 +1,579 @@
+/*
+ * Samsung's Exynos3250 based Monk board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Monk board which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung Monk board";
+ compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
+
+ aliases {
+ i2c7 = &i2c_max77836;
+ };
+
+ memory {
+ reg = <0x40000000 0x1ff00000>;
+ };
+
+ firmware at 0205F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0205F000 0x1000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ power_key {
+ interrupt-parent = <&gpx2>;
+ interrupts = <7 0>;
+ gpios = <&gpx2 7 1>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ vemmc_reg: voltage-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_EMMC_2.8V-fixed";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ i2c_max77836: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ max77836: subpmic at 25 {
+ compatible = "maxim,max77836";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ reg = <0x25>;
+ wakeup;
+
+ muic: max77836-muic {
+ compatible = "maxim,max77836-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77836-regulator";
+ safeout_reg: SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <45000>;
+ regulator-max-microamp = <475000>;
+ regulator-boot-on;
+ };
+
+ motor_reg: LDO1 {
+ regulator-name = "MOT_2.7V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ LDO2 {
+ regulator-name = "UNUSED_LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77836-charger";
+
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <225000>;
+ maxim,eoc-uamp = <7500>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+ assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+ assigned-clock-rates = <6000000>;
+
+ thermistor-ap {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 1>;
+ };
+};
+
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ s2mps14_pmic at 66 {
+ compatible = "samsung,s2mps14-pmic";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x66>;
+ wakeup;
+
+ s2mps14_osc: clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused",
+ "s2mps14_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VAP_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VAP_M1_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VCC_AP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VAP_AVDD_PLL1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VAP_PLL_ISO_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VAP_MIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VAP_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VAP_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "V_LPDDR_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "UNUSED_LDO10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "V_EMMC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "V_EMMC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VSENSOR_2.85V";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "UNUSED_LDO14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "LCD_VDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "UNUSED_LDO17";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "UNUSED_LDO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "LCD_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "UNUSED_LDO21";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "UNUSED_LDO22";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "UNUSED_LDO23";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "UNUSED_LDO24";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "UNUSED_LDO25";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VAP_MIF_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VAP_ARM_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VAP_INT3D_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VCC_SUB_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ fuelgauge at 36 {
+ compatible = "maxim,max77836-battery";
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 8>;
+ reg = <0x36>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&mshc_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-slots = <1>;
+ broken-cd;
+ non-removable;
+ cap-mmc-highspeed;
+ desc-num = <4>;
+ mmc-hs200-1_8v;
+ card-detect-delay = <200>;
+ vmmc-supply = <&vemmc_reg>;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <400000 100000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&serial_0 {
+ assigned-clocks = <&cmu CLK_SCLK_UART0>;
+ assigned-clock-rates = <100000000>;
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&tmu {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clock-names = "rtc", "rtc_src";
+ status = "okay";
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-state {
+ PIN_SLP(gpa0-0, INPUT, DOWN);
+ PIN_SLP(gpa0-1, INPUT, DOWN);
+ PIN_SLP(gpa0-2, INPUT, DOWN);
+ PIN_SLP(gpa0-3, INPUT, DOWN);
+ PIN_SLP(gpa0-4, INPUT, DOWN);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, DOWN);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, PREV, NONE);
+ PIN_SLP(gpb-1, PREV, NONE);
+ PIN_SLP(gpb-2, PREV, NONE);
+ PIN_SLP(gpb-3, PREV, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, DOWN);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, DOWN);
+ PIN_SLP(gpc1-1, INPUT, DOWN);
+ PIN_SLP(gpc1-2, INPUT, DOWN);
+ PIN_SLP(gpc1-3, INPUT, DOWN);
+ PIN_SLP(gpc1-4, INPUT, DOWN);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, NONE);
+ PIN_SLP(gpd1-1, INPUT, NONE);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-state {
+ PIN_SLP(gpe0-0, PREV, NONE);
+ PIN_SLP(gpe0-1, PREV, NONE);
+ PIN_SLP(gpe0-2, INPUT, DOWN);
+ PIN_SLP(gpe0-3, INPUT, DOWN);
+ PIN_SLP(gpe0-4, PREV, NONE);
+ PIN_SLP(gpe0-5, INPUT, DOWN);
+ PIN_SLP(gpe0-6, INPUT, DOWN);
+ PIN_SLP(gpe0-7, INPUT, DOWN);
+
+ PIN_SLP(gpe1-0, INPUT, DOWN);
+ PIN_SLP(gpe1-1, PREV, NONE);
+ PIN_SLP(gpe1-2, INPUT, DOWN);
+ PIN_SLP(gpe1-3, INPUT, DOWN);
+ PIN_SLP(gpe1-4, INPUT, DOWN);
+ PIN_SLP(gpe1-5, INPUT, DOWN);
+ PIN_SLP(gpe1-6, INPUT, DOWN);
+ PIN_SLP(gpe1-7, INPUT, NONE);
+
+ PIN_SLP(gpe2-0, INPUT, NONE);
+ PIN_SLP(gpe2-1, INPUT, NONE);
+ PIN_SLP(gpe2-2, INPUT, NONE);
+
+ PIN_SLP(gpk0-0, INPUT, DOWN);
+ PIN_SLP(gpk0-1, INPUT, DOWN);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, INPUT, DOWN);
+ PIN_SLP(gpk0-4, INPUT, DOWN);
+ PIN_SLP(gpk0-5, INPUT, DOWN);
+ PIN_SLP(gpk0-6, INPUT, DOWN);
+ PIN_SLP(gpk0-7, INPUT, DOWN);
+
+ PIN_SLP(gpk1-0, PREV, NONE);
+ PIN_SLP(gpk1-1, PREV, NONE);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, DOWN);
+ PIN_SLP(gpm1-3, INPUT, DOWN);
+ PIN_SLP(gpm1-4, INPUT, DOWN);
+ PIN_SLP(gpm1-5, INPUT, DOWN);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, DOWN);
+ PIN_SLP(gpm2-1, INPUT, DOWN);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, INPUT, DOWN);
+ PIN_SLP(gpm3-1, INPUT, DOWN);
+ PIN_SLP(gpm3-2, INPUT, DOWN);
+ PIN_SLP(gpm3-3, INPUT, DOWN);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+ };
+};
--
1.8.5.5
More information about the linux-arm-kernel
mailing list