[PATCHv6 05/10] arm: mvebu: define and use common Armada 370 SPI pinctrl settings

Arnaud Ebalard arno at natisbad.org
Fri Nov 21 15:46:10 PST 2014


This patch defines common Armada 370 pinctrl settings for spi0 and spi1
interfaces:

 spi0: MPP33-36 as default, MPP32,63-65 as available alternate config
 spi1: MPP49-52 as default

Currently, the Armada 370 DB .dts file has no explicit pinctrl info
for the spi0 interface used to access the flash on the board. The
patch fixes that by also adding explicit pinctrl info (MPP32,63-65)
for this SPI interface.

Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config.

Suggested-by: Andrew Lunn <andrew at lunn.ch>
Acked-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
---
 arch/arm/boot/dts/armada-370-db.dts |  2 ++
 arch/arm/boot/dts/armada-370.dtsi   | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 29f1c8c0369f..f688ab4202e3 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -111,6 +111,8 @@
 			};
 
 			spi0: spi at 10600 {
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				spi-flash at 0 {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 90e1286d414f..f1227c53e92d 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -99,6 +99,20 @@
 				wt-override;
 			};
 
+			/*
+			 * Default SPI pinctrl setting, can be overwritten on
+			 * board level if a different configuration is used.
+			 */
+			spi0: spi at 10600 {
+				pinctrl-0 = <&spi0_pins1>;
+				pinctrl-names = "default";
+			};
+
+			spi1: spi at 10680 {
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+			};
+
 			i2c0: i2c at 11000 {
 				reg = <0x11000 0x20>;
 			};
@@ -249,6 +263,24 @@
 &pinctrl {
 	compatible = "marvell,mv88f6710-pinctrl";
 
+	spi0_pins1: spi0-pins1 {
+		marvell,pins = "mpp33", "mpp34",
+			       "mpp35", "mpp36";
+		marvell,function = "spi0";
+	};
+
+	spi0_pins2: spi0_pins2 {
+		marvell,pins = "mpp32", "mpp63",
+			       "mpp64", "mpp65";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp49", "mpp50",
+			       "mpp51", "mpp52";
+		marvell,function = "spi1";
+	};
+
 	sdio_pins1: sdio-pins1 {
 		marvell,pins = "mpp9",  "mpp11", "mpp12",
 				"mpp13", "mpp14", "mpp15";
-- 
2.1.1





More information about the linux-arm-kernel mailing list