[PATCH 6/9] mmc: sdhci: host: add new f_sdh30

[Rob Herring]

On Thu, Nov 20, 2014 at 10:59 AM, Vincent Yang
<vincent.yang.fujitsu at gmail.com> wrote:
> 2014-11-20 23:22 GMT+08:00 Rob Herring <robherring2 at gmail.com>:
>> On Thu, Nov 20, 2014 at 6:38 AM, Vincent Yang
>> <vincent.yang.fujitsu at gmail.com> wrote:
>>> This patch adds new host controller driver for
>>> Fujitsu SDHCI controller f_sdh30.
>>>
>>> Signed-off-by: Andy Green <andy.green at linaro.org>
>>> Signed-off-by: Vincent Yang <Vincent.Yang at tw.fujitsu.com>
>>> Signed-off-by: Tetsuya Takinishi <t.takinishi at jp.fujitsu.com>
>>> ---
>>>  .../devicetree/bindings/mmc/sdhci-fujitsu.txt      |  35 +++
>>>  drivers/mmc/host/Kconfig                           |   9 +
>>>  drivers/mmc/host/Makefile                          |   1 +
>>>  drivers/mmc/host/sdhci_f_sdh30.c                   | 319 +++++++++++++++++++++
>>>  4 files changed, 364 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
>>>  create mode 100644 drivers/mmc/host/sdhci_f_sdh30.c
>>>
>>> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
>>> new file mode 100644
>>> index 0000000..a1e0b64
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
>>> @@ -0,0 +1,35 @@
>>> +* Fujitsu SDHCI controller
>>> +
>>> +This file documents differences between the core properties in mmc.txt
>>> +and the properties used by the sdhci_f_sdh30 driver.
>>> +
>>> +Required properties:
>>> +- compatible: "fujitsu,mb86s70-sdh30"
>>
>> It would be nice to have sdhci in the name to indicate it is an SDHCI
>> controller.
>
> Yes, we will update it to "fujitsu,sdhci-f-sdh30"
> Thanks for your review!

Not really what I had in mind as you are then dropping the chip name.
Perhaps "fujitsu,mb86s70-sdhci-3.0". Is 3.0 the SD spec version or IP
version? If the former, I think I'd drop it as IIRC that is available
in a register.

Rob