[PATCH 07/11] arm: perf: document PMU affinity binding

Mark Rutland mark.rutland at arm.com
Mon Nov 17 07:01:46 PST 2014


Hi Rob,

I appear to have typo'd your address when posting this. Sorry about
that; I'll make sure it doesn't happen again.

On Mon, Nov 17, 2014 at 02:32:57PM +0000, Rob Herring wrote:
> On Fri, Nov 7, 2014 at 10:25 AM, Mark Rutland <mark.rutland at arm.com> wrote:
> > To describe the various ways CPU PMU interrupts might be wired up, we
> > can refer to the topology information in the device tree.
> >
> > This patch adds a new property to the PMU binding, interrupts-affinity,
> > which describes the relationship between CPUs and interrupts. This
> > information is necessary to handle systems with heterogeneous PMU
> > implementations (e.g. big.LITTLE). Documentation is added describing the
> > use of said property.
> >
> > Signed-off-by: Mark Rutland <mark.rutland at arm.com>
> > ---
> >  Documentation/devicetree/bindings/arm/pmu.txt | 104 +++++++++++++++++++++++++-
> >  1 file changed, 103 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
> > index 75ef91d..23a0675 100644
> > --- a/Documentation/devicetree/bindings/arm/pmu.txt
> > +++ b/Documentation/devicetree/bindings/arm/pmu.txt
> > @@ -24,12 +24,114 @@ Required properties:
> >
> >  Optional properties:
> >
> > +- interrupts-affinity : A list of phandles to topology nodes (see topology.txt) describing
> > +            the set of CPUs associated with the interrupt at the same index.
> 
> Are there cases beyond PMUs we need to handle? I would think so, so we
> should document this generically.

That was what I tried way back when I first tried to upstream all of
this, but in the mean time I've not encountered other devices which are
really CPU-affine which use SPIs and hence need a CPU<->IRQ relationship
described.

That said, I'm happy to document whatever approach for referring to a
set of CPUs that we settle on, if that seems more general than PMU IRQ
mapping.

> > -Example:
> > +Example 1 (A single CPU):
> 
> Isn't this a single cluster of 2 cpus?

Yes, it is. My bad.

> >  pmu {
> >          compatible = "arm,cortex-a9-pmu";
> >          interrupts = <100 101>;
> >  };
> > +
> > +Example 2 (Multiple clusters with single interrupts):
> 
> The meaning of single could be made a bit more clear especially if you
> consider Will's case. But I haven't really thought of better
> wording...

How about "A cluster of homogeneous CPUs"?

> > +
> > +cpus {
> > +       #address-cells = <1>;
> > +       #size-cells = <1>;
> > +
> > +       CPU0: cpu at 0 {
> > +               reg = <0x0>;
> > +               compatible = "arm,cortex-a15-pmu";
> > +       };
> > +
> > +       CPU1: cpu at 1 {
> > +               reg = <0x1>;
> > +               compatible = "arm,cotex-a15-pmu";
> > +       };
> > +
> > +       CPU100: cpu at 100 {
> > +               reg = <0x100>;
> > +               compatible = "arm,cortex-a7-pmu";
> > +       };
> > +
> > +       cpu-map {
> > +               cluster0 {
> > +                       CORE_0_0: core0 {
> > +                               cpu = <&CPU0>;
> > +                       };
> > +                       CORE_0_1: core1 {
> > +                               cpu = <&CPU1>;
> > +                       };
> > +               };
> > +               cluster1 {
> > +                       CORE_1_0: core0 {
> > +                               cpu = <&CPU100>;
> > +                       };
> > +               };
> > +       };
> > +};
> > +
> > +pmu_a15 {
> > +       compatible = "arm,cortex-a15-pmu";
> > +       interrupts = <100>, <101>;
> > +       interrupts-affinity = <&CORE0>, <&CORE1>;
> 
> The phandle names are wrong here.

Whoops. I've fixed that up locally now.

Thanks,
Mark.



More information about the linux-arm-kernel mailing list