[PATCH V3 3/3] mfd: palmas: Add support for optional wakeup
Felipe Balbi
balbi at ti.com
Fri Nov 14 08:19:10 PST 2014
Hi,
On Thu, Nov 13, 2014 at 09:40:31AM -0800, Tony Lindgren wrote:
[snip]
> From: Tony Lindgren <tony at atomide.com>
> Date: Tue, 11 Nov 2014 07:53:55 -0800
> Subject: [PATCH] genirq: Add support for wake-up interrupts to fix irq reentry issues in drivers
>
> As pointed out by Thomas Gleixner, at least omap wake-up interrupts
> have an issue with re-entrant interrupts because the wake-up interrupts
> are now handled as a secondary interrupt controller. Further, the
> wake-up interrupt just needs wake the system at least for omaps. So we
> should make the wake-up interrupt handling generic.
>
> Note that at least initially we are keeping things simple by assuming the
> wake-up interrupt is level sensitive, and the device pm_runtime_resume()
> can deal with the situation, and no replaying of the lost device interrupts
> is needed.
>
> After tinkering with replaying of the lost device interrupts, my opinion is
> that it should be avoided because of the issues listed in the comments of
> this patch.
>
> Let's also add a minimal manage.h to allow us keeping the separation
> of devm functions and without having to include internals.h in devres.c.
>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
>
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -139,11 +139,15 @@ extern int __must_check
> request_percpu_irq(unsigned int irq, irq_handler_t handler,
> const char *devname, void __percpu *percpu_dev_id);
>
> +struct device;
> +
> +extern int __must_check
> +request_wake_irq(struct device *dev, unsigned int wakeirq,
> + unsigned long irqflags);
> +
> extern void free_irq(unsigned int, void *);
> extern void free_percpu_irq(unsigned int, void __percpu *);
>
> -struct device;
> -
> extern int __must_check
> devm_request_threaded_irq(struct device *dev, unsigned int irq,
> irq_handler_t handler, irq_handler_t thread_fn,
> @@ -163,6 +167,10 @@ devm_request_any_context_irq(struct device *dev, unsigned int irq,
> irq_handler_t handler, unsigned long irqflags,
> const char *devname, void *dev_id);
>
> +extern int __must_check
> +devm_request_wake_irq(struct device *dev, unsigned int wakeirq,
> + unsigned long irqflags);
> +
> extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
>
> /*
> --- a/kernel/irq/devres.c
> +++ b/kernel/irq/devres.c
> @@ -3,6 +3,8 @@
> #include <linux/device.h>
> #include <linux/gfp.h>
>
> +#include "manage.h"
> +
> /*
> * Device resource management aware IRQ request/free implementation.
> */
> @@ -118,6 +120,30 @@ int devm_request_any_context_irq(struct device *dev, unsigned int irq,
> EXPORT_SYMBOL(devm_request_any_context_irq);
>
> /**
> + * devm_request_wake_irq - request a wake-up interrupt for a device
> + * @dev: device to wake on the wake-up interrupt
> + * @wakeirq: wake-up interrupt for the device
> + * @wakeirq: wake-up interrupt flags
> + *
> + * The wake-up interrupt starts disabled and is typically enabled
> + * when needed by the device driver runtime PM calls.
> + */
> +int devm_request_wake_irq(struct device *dev, unsigned int wakeirq,
> + unsigned long wakeflags)
> +{
> + int ret;
> +
> + ret = init_disabled_wakeirq(dev, wakeirq, wakeflags);
> + if (ret)
> + return ret;
> +
> + return devm_request_threaded_irq(dev, wakeirq, NULL,
> + handle_wakeirq_thread,
> + wakeflags, dev_name(dev), dev);
> +}
> +EXPORT_SYMBOL_GPL(devm_request_wake_irq);
> +
> +/**
> * devm_free_irq - free an interrupt
> * @dev: device to free interrupt for
> * @irq: Interrupt line to free
> --- a/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -14,12 +14,14 @@
> #include <linux/module.h>
> #include <linux/random.h>
> #include <linux/interrupt.h>
> +#include <linux/pm_runtime.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> #include <linux/sched/rt.h>
> #include <linux/task_work.h>
>
> #include "internals.h"
> +#include "manage.h"
>
> #ifdef CONFIG_IRQ_FORCED_THREADING
> __read_mostly bool force_irqthreads;
> @@ -1564,6 +1566,112 @@ int request_any_context_irq(unsigned int irq, irq_handler_t handler,
> }
> EXPORT_SYMBOL_GPL(request_any_context_irq);
>
> +/**
> + * handle_wakeirq_thread - call device runtime pm calls on wake-up interrupt
> + * @wakeirq: device specific wake-up interrupt
> + * @dev_id: struct device entry
> + */
> +irqreturn_t handle_wakeirq_thread(int wakeirq, void *dev_id)
> +{
> + struct device *dev = dev_id;
> + irqreturn_t ret = IRQ_NONE;
> +
> + if (pm_runtime_suspended(dev)) {
> + pm_runtime_mark_last_busy(dev);
> + pm_request_resume(dev);
this assumes that every driver's ->resume() callback has a:
if (pending)
handle_pending_irqs();
which might not be very nice. I'd rather follow what Thomas suggested
and always pass device irq so this can mark it pending. Keep in mind
that we *don't* need a pm_runtime_get_sync() in every IRQ handler
because of that. Adding it is but the easiest way to get things working
and, quite frankly, very silly.
what we want is rather:
irqreturn_t my_handler(int irq, void *dev_id)
{
struct device *dev = dev_id;
if (pm_runtime_suspended(dev)) {
pending_irqs_to_be_handled_from_runtime_resume = true;
pm_runtime_get(dev);
clear_irq_source(dev);
return IRQ_HANDLED;
}
}
or something similar.
> + ret = IRQ_HANDLED;
> + }
you're not masking the wake irq here which means that when this handler
returns, wake irq will be unmasked by core IRQ subsystem leaving it
unmasked after ->resume().
> + return ret;
> +}
> +
> +/**
> + * init_disabled_wakeirq - initialize a wake-up interrupt for a device
> + * @dev: device to wake up on the wake-up interrupt
> + * @wakeirq: wake-up interrupt for the device
> + * @wakeflags: wake-up interrupt flags
> + *
> + * Note that the wake-up interrupt starts disabled. The wake-up interrupt
> + * is typically enabled from the device pm_runtime_suspend() and disabled
> + * again in the device pm_runtime_resume(). For runtime PM, the wake-up
> + * interrupt should be always enabled, and for device suspend and resume,
> + * the wake-up interrupt should be enabled depending on the device specific
> + * configuration for device_can_wakeup().
> + *
> + * Note also that we are not resending the lost device interrupts.
> + * We assume that the wake-up interrupt just needs to wake-up the device,
> + * and then device pm_runtime_resume() can deal with the situation.
> + *
> + * There are at least the following reasons to not resend the lost device
> + * interrupts automatically based on the wake-up interrupt:
> + *
> + * 1. There can be interrupt reentry issues calling the device interrupt
> + * based on the wake-up interrupt if done in the device driver. It
> + * could be done with check_irq_resend() after checking the device
> + * interrupt mask if we really wanted to though.
> + *
> + * 2. The device interrupt handler would need to be set up properly with
> + * pm_runtime_irq_safe(). Ideally you don't want to call pm_runtime
> + * calls from the device interrupt handler at all.
> + *
> + * 3. The IRQ subsystem may not know if it's safe to call the device
> + * interrupt unless the driver updates the interrupt status with
> + * disable_irq() and enable_irq() in addition to just disabling the
> + * interrupt at the hardware level in the device registers.
> + *
> + * So if replaying the lost device interrupts is absolutely needed from the
> + * hardware point of view, it's probably best to set up a completely
> + * separate wake-up interrupt handler for the wake-up interrupt in the
> + * device driver because of the reasons above.
> + */
> +int init_disabled_wakeirq(struct device *dev, unsigned int wakeirq,
> + unsigned long wakeflags)
> +{
> + if (!(dev && wakeirq)) {
> + pr_err("Missing device or wakeirq for %s irq %d\n",
> + dev_name(dev), wakeirq);
> + return -EINVAL;
> + }
> +
> + if (!(wakeflags & IRQF_ONESHOT)) {
> + pr_err("Invalid wakeirq for %s irq %d, must be oneshot\n",
> + dev_name(dev), wakeirq);
> + return -EINVAL;
> + }
you *know* you'll pass a NULL top half handler, why don't you just force
IRQF_ONESHOT instead of erroring out ? Just add:
wakeflags |= IRQF_ONESHOT;
and get it over with :-)
> + if (wakeflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))
> + pr_warn("Not replaying device IRQs for %s on wakeirq%d\n",
> + dev_name(dev), wakeirq);
> +
> + irq_set_status_flags(wakeirq, _IRQ_NOAUTOEN);
> +
> + return 0;
> +}
> +
> +/**
> + * request_wake_irq - request a wake-up interrupt for a device
> + * @dev: device to wake on the wake-up interrupt
> + * @wakeirq: wake-up interrupt for the device
> + * @wakeirq: wake-up interrupt flags
> + *
> + * The wake-up interrupt starts disabled and is typically enabled
> + * when needed by the device driver runtime PM calls.
> + */
> +int request_wake_irq(struct device *dev, unsigned int wakeirq,
> + unsigned long wakeflags)
> +{
> + int ret;
> +
> + ret = init_disabled_wakeirq(dev, wakeirq, wakeflags);
> + if (ret)
> + return ret;
> +
> + return request_threaded_irq(wakeirq, NULL,
> + handle_wakeirq_thread,
> + wakeflags, dev_name(dev), dev);
> +}
> +EXPORT_SYMBOL_GPL(request_wake_irq);
> +
> void enable_percpu_irq(unsigned int irq, unsigned int type)
> {
> unsigned int cpu = smp_processor_id();
> --- /dev/null
> +++ b/kernel/irq/manage.h
> @@ -0,0 +1,11 @@
> +/*
> + * IRQ subsystem internal management functions and variables:
> + *
> + * Do not ever include this file from anything else than
> + * kernel/irq/. Do not even think about using any information outside
> + * of this file for your non core code.
> + */
> +
> +irqreturn_t handle_wakeirq_thread(int wakeirq, void *dev_id);
> +int init_disabled_wakeirq(struct device *dev, unsigned int wakeirq,
> + unsigned long wakeflags);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/087ef6f7/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list