[PATCH v6 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02

[Shawn Guo]

On Tue, Nov 04, 2014 at 04:05:47PM +0300, Dmitry Lavnikevich wrote:
> Since pins and frequency are specific to module (pfla02), not base board
> (pbab02), it is better to be initialized in corresponding dts file.
> 
> This patch fixes i2c2, i2c3 pin configuration which caused messages:
> 
> imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus at 02000000/iomuxc at 020e0000/i2c2grp
> imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus at 02000000/iomuxc at 020e0000/i2c3grp
> imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp
> imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp
> 
> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich at sam-solutions.com>

Applied all 3, thanks.