[PATCH v9 4/8] ARM: dts: Enable Broadcom Cygnus SoC

Olof Johansson olof at lixom.net
Mon Nov 10 10:35:36 PST 2014


On Mon, Nov 10, 2014 at 2:50 AM, Paul Bolle <pebolle at tiscali.nl> wrote:
> On Tue, 2014-10-28 at 16:15 -0700, Scott Branden wrote:
>> DT files to enable cygnus consisting on reference designs
>> and cygnus core configuration.
>>
>> Reviewed-by: Ray Jui <rjui at broadcom.com>
>> Reviewed-by: Arun Parameswaran <aparames at broadcom.com>
>> Tested-by: Jonathan Richardson <jonathar at broadcom.com>
>> Reviewed-by: JD (Jiandong) Zheng <jdzheng at broadcom.com>
>> Signed-off-by: Scott Branden <sbranden at broadcom.com>
>
> This landed in today's linux-next (ie, next-21041110) as commit
> 8872fc22c267 ("ARM: dts: Enable Broadcom Cygnus SoC").
>
>>  arch/arm/boot/dts/Makefile              |    4 ++
>>  arch/arm/boot/dts/bcm-cygnus-clock.dtsi |   73 ++++++++++++++++++++++
>>  arch/arm/boot/dts/bcm-cygnus.dtsi       |  100 +++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/bcm911360_entphn.dts  |   32 ++++++++++
>>  arch/arm/boot/dts/bcm911360k.dts        |   32 ++++++++++
>>  arch/arm/boot/dts/bcm958300k.dts        |   32 ++++++++++
>>  6 files changed, 273 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi
>>  create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
>>  create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
>>  create mode 100644 arch/arm/boot/dts/bcm911360k.dts
>>  create mode 100644 arch/arm/boot/dts/bcm958300k.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 38c89ca..4b3a590 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91)    += at91-sama5d4ek.dtb
>>  dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
>>  dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
>>  dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
>> +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
>> +     bcm911360_entphn.dtb \
>> +     bcm911360k.dtb \
>> +     bcm958300k.dtb
>>  dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
>>  dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
>>  dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
>
> Without patch 1/8 ("ARM: cygnus: Initial support for Broadcom Cygnus
> SoC") CONFIG_ARCH_BCM_CYGNUS will not be set. I guess patch 1/8 will be
> added to linux-next one of these days. Is that correct?

Yes.


-Olof



More information about the linux-arm-kernel mailing list