[PATCH 2/3] mvebu: 370 RD: Add support for the switch

[Jason Cooper]

On Wed, Nov 05, 2014 at 08:02:00PM +0100, Andrew Lunn wrote:
> The 370 rd has a 7 port, mv88E6182 switch, connected to eth1.  Add a
> fixed-link subnode to the ethernet device tree node, to force
> gigabit/full duplex.  Add a dsa node, with describing the four used
> ports. This requires adding an alias to the mdio node, so it can be
> referenced as a phandle.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
>  arch/arm/boot/dts/armada-370-rd.dts  | 49 ++++++++++++++++++++++++++++++++----
>  arch/arm/boot/dts/armada-370-xp.dtsi |  2 +-
>  2 files changed, 45 insertions(+), 6 deletions(-)

Applied to mvebu/dt

thx,

Jason.