[PATCH v17 1/5] thermal: rockchip: add driver for thermal
edubezval at gmail.com
Thu Nov 6 17:30:20 PST 2014
On Sat, Nov 01, 2014 at 10:44:29AM +0800, Caesar Wang wrote:
> Thermal is TS-ADC Controller module supports
> user-defined mode and automatic mode.
> User-defined mode refers,TSADC all the control signals entirely by
> software writing to register for direct control.
> Automaic mode refers to the module automatically poll TSADC output,
> and the results were checked.If you find that the temperature High
> in a period of time,an interrupt is generated to the processor
> down-measures taken;If the temperature over a period of time High,
> the resulting TSHUT gave CRU module,let it reset the entire chip,
> or via GPIO give PMIC.
First thing, very good progress in this driver!
> Signed-off-by: zhaoyifeng <zyf at rock-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang at rock-chips.com>
> Reviewed-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
Just for the sake of code / documentation history, this patch, which
adds the driver, should come after patch 2, which adds dt documentation.
> drivers/thermal/Kconfig | 9 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/rockchip_thermal.c | 711 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 721 insertions(+)
> create mode 100644 drivers/thermal/rockchip_thermal.c
> +static int
> +rockchip_thermal_register_sensor(struct platform_device *pdev,
> + struct rockchip_thermal_data *thermal,
> + struct rockchip_thermal_sensor *sensor,
> + enum sensor_id id)
> + const struct rockchip_tsadc_chip *tsadc = thermal->chip;
> + int error;
> + tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
> + tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
> + sensor->thermal = thermal;
> + sensor->id = id;
> + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
> + rockchip_thermal_get_temp,
> + NULL,
> + rockchip_thermal_set_trips);
So, did I miss something here? Looks like you have extended the of
thermal, and I haven't seen the patch.
CC [M] drivers/thermal/rockchip_thermal.o
drivers/thermal/rockchip_thermal.c: In function
drivers/thermal/rockchip_thermal.c:482:7: error: too many arguments to
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 473 bytes
Desc: Digital signature
More information about the linux-arm-kernel