[PATCH v8 3/3] ARM: dts: add rk3288 power-domain node

Caesar Wang caesar.wang at rock-chips.com
Thu Nov 6 05:19:56 PST 2014


在 2014年11月06日 16:45, Kever Yang 写道:
> Hi Caesar,
>
> On 11/06/2014 02:22 PM, Caesar Wang wrote:
>> Signed-off-by: Jack Dai <jack.dai at rock-chips.com>
>> Signed-off-by: jinkun.hong <jinkun.hong at rock-chips.com>
>> Signed-off-by: Caesar Wang <caesar.wang at rock-chips.com>
> pls detail the reason why you need to add all the clocks into 
> power-controller node.

OK, I will fix in next patch v9 if there is no other problems in 1-2 days.

>> ---
>>
>> Changes in v8:
>>      - DTS go back to v2
>>
>> Changes in v7: None
>> Changes in v6: None
>> Changes in v5: None
>> Changes in v4: None
>> Changes in v3:
>>      - Decomposition power-controller, changed to multiple controller
>>      (gpu-power-controller, hevc-power-controller)
>>
>> Changes in v2:
>>      - make pd_vio clocks all one entry per line and alphabetize.
>>      - power: power-controller move back to pinctrl: pinctrl.
>>
>>   arch/arm/boot/dts/rk3288.dtsi | 66 
>> +++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi 
>> b/arch/arm/boot/dts/rk3288.dtsi
>> index cb18bb4..9cd269a 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -989,4 +989,70 @@
>>               };
>>           };
>>       };
>> +
>> +    power: power-controller {
>> +        compatible = "rockchip,rk3288-power-controller";
>> +        #power-domain-cells = <1>;
>> +        rockchip,pmu = <&pmu>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        pd_gpu {
>> +            reg = <RK3288_PD_GPU>;
>> +            clocks = <&cru ACLK_GPU>;
>> +        };
>> +
>> +        pd_hevc {
>> +            reg = <RK3288_PD_HEVC>;
>> +            clocks = <&cru ACLK_HEVC>,
>> +                 <&cru SCLK_HEVC_CABAC>,
>> +                 <&cru SCLK_HEVC_CORE>,
>> +                 <&cru HCLK_HEVC>;
>> +        };
>> +
>> +        pd_vio {
>> +            reg = <RK3288_PD_VIO>;
>> +            clocks = <&cru ACLK_IEP>,
>> +                 <&cru ACLK_ISP>,
>> +                 <&cru ACLK_RGA_NIU>,
>> +                 <&cru ACLK_RGA>,
>> +                 <&cru ACLK_VIO0_NIU>,
>> +                 <&cru ACLK_VIO1_NIU>,
>> +                 <&cru ACLK_VIP>,
>> +                 <&cru ACLK_VOP0>,
>> +                 <&cru ACLK_VOP1>,
>> +                 <&cru DCLK_VOP0>,
>> +                 <&cru DCLK_VOP1>,
>> +                 <&cru HCLK_IEP>,
>> +                 <&cru HCLK_ISP>,
>> +                 <&cru HCLK_RGA>,
>> +                 <&cru HCLK_VIO_AHB_ARBI>,
>> +                 <&cru HCLK_VIO_NIU>,
>> +                 <&cru HCLK_VIO2_H2P>,
>> +                 <&cru HCLK_VIP>,
>> +                 <&cru HCLK_VOP0>,
>> +                 <&cru HCLK_VOP1>,
>> +                 <&cru PCLK_EDP_CTRL>,
>> +                 <&cru PCLK_HDMI_CTRL>,
>> +                 <&cru PCLK_LVDS_PHY>,
>> +                 <&cru PCLK_MIPI_CSI>,
>> +                 <&cru PCLK_MIPI_DSI0>,
>> +                 <&cru PCLK_MIPI_DSI1>,
>> +                 <&cru PCLK_VIO2_H2P>,
>> +                 <&cru SCLK_EDP_24M>,
>> +                 <&cru SCLK_EDP>,
>> +                 <&cru SCLK_HDMI_CEC>,
>> +                 <&cru SCLK_HDMI_HDCP>,
>> +                 <&cru SCLK_ISP_JPE>,
>> +                 <&cru SCLK_ISP>,
>> +                 <&cru SCLK_RGA>;
>> +        };
>> +
>> +        pd_video {
>> +            reg = <RK3288_PD_VIDEO>;
>> +            /* FIXME: add clocks */
> remove the 'FIXME'.

Fixed.

>> +            clocks = <&cru ACLK_VCODEC>,
>> +                 <&cru HCLK_VCODEC>;
>> +        };
>> +    };
>>   };
>
>
>
>

-- 
Best regards,
Caesar





More information about the linux-arm-kernel mailing list