[PATCH v6 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency

Nishanth Menon nm at ti.com
Fri May 30 12:50:29 PDT 2014


On 05/30/2014 01:55 PM, Mark Rutland wrote:
> On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
>> Hi Mark,
>>
>> On Fri, May 30, 2014 at 6:38 PM, Mark Rutland <mark.rutland at arm.com> wrote:
>>> Hi,
>>>
>>> Apologies for being somewhat late w.r.t. review on this.
>>>
>>> On Fri, May 30, 2014 at 10:01:17AM +0100, Thomas Abraham wrote:
>>>> From: Thomas Abraham <thomas.ab at samsung.com>
>>>>
>>>> Add a new optional boost-frequency binding for specifying the frequencies
>>>> usable in boost mode.
>>>>
>>>> Cc: Rob Herring <robh+dt at kernel.org>
>>>> Cc: Pawel Moll <pawel.moll at arm.com>
>>>> Cc: Mark Rutland <mark.rutland at arm.com>
>>>> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
>>>> Cc: Kumar Gala <galak at codeaurora.org>
>>>> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
>>>> Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
>>>> Acked-by: Nishanth Menon <nm at ti.com>
>>>> Acked-by: Lukasz Majewski <l.majewski at samsung.com>
>>>> ---
>>>>  .../devicetree/bindings/cpufreq/cpufreq-boost.txt  |   38 ++++++++++++++++++++
>>>>  1 file changed, 38 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
>>>> new file mode 100644
>>>> index 0000000..63ed0fc
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
>>>> @@ -0,0 +1,38 @@
>>>> +* Device tree binding for CPU boost frequency (aka over-clocking)
>>>> +
>>>> +Certain CPU's can be operated in optional 'boost' mode (or sometimes referred as
>>>
>>> Nit: CPUs (we're not greengrocers [1])
>>>
>>>> +overclocking) in which the CPU can operate at frequencies which are not
>>>> +specified by the manufacturer as CPU's operating frequency.
>>>> +
>>>> +Optional Properties:
>>>> +- boost-frequencies: list of frequencies in KHz to be used only in boost mode.
>>>> +  This list should be a subset of frequencies listed in "operating-points"
>>>> +  property. Refer to Documentation/devicetree/bindings/power/opp.txt for
>>>> +  details about "operating-points" property.
>>>
>>> What is 'boost-mode'?
>>
>> boost-mode activates additional one or more cpu clock speeds (which
>> are not specified as operating frequency of the cpu by the
>> manufacturer). The cpu is allowed to operate in these boost mode
>> speeds when the boost mode is active. The boost mode speeds are
>> usually undocumented. Some of the chip samples could be clocked in
>> boost mode speeds and only such samples can be safely operated in
>> boost mode.
>>
>> The mechanism of entry into and exit out of boost mode is outside the
>> scope of this documentation.
>>
>>>
>>> What are the limitations on boost frequencies? When is a CPU expected to
>>> go to these frequencies and for now long? When should I as a dt author
>>> place elements in boost-frequencies?
>>
>> I will add these details in the next revision of this patch.
> 
> Cheers.
> 
>>>
>>> Why are these in both operating-points and boost-frequencies? It'll be
>>> really easy to accidentally forget to mark something as a
>>> boost-frequency this way. Why not have a boost-points instead?
>>
>> Does boost-points mean a set of clock speeds which are not listed as
>> part of operating-points property? If yes, that also is a possible
>> implementation (it was implemented in one of the earlier version of
>> this series). Could you confirm that you want the boost mode speeds to
>> be exclusive of the speeds listed in operating-points?
> 
> If these boost mode operating points are not generally advisable for use
> as the other operating-points are, then they should IMO been in an
> entirely separate property exclusive of (but in the same format as) the
> operating-points property, e.g.
> 
> operating points = <A B>, <C D>;
> boost-points = <E F>;

you are asking boost frequencies to remain for ever tied down to OPP
style description.

What we are trying to describe? "What are my SoC's overclocked
frequencies"? That description can be used even in a system that does
not use OPP style table (say ACPI based OPP tables or whatever
acronymned table).

Tying it down to operating points just because we have it today as a
convenient description, is limiting.

Further, if we decide to educate boost-frequencies to also indicate
how long is it safe? That does indeed belong to boost-frequency
description and not OPP description. Or if we decide to change
operating-points description[1] in the future has an impact on
"boost-points" description, when it should not have.

> 
> Otherwise, without boost-mode support we have to parse the boost mode
> table to figure out which points to avoid. Or if someone typos a value
That is OS usage of h/w description - yeah - in anycase, if OS has no
ability to deal with boost-frequencies, it should skip it for sure.

> in either table we might go into a boost mode when we didn't want to!
> 
There are other ways to screw up device with dts typo. you could give
a wrong voltage(extra 0?) and ensure you never use the chip ever
again.. typos are dt bugs, we can do the best to write robust code to
report them.


[1] http://marc.info/?t=140059618500008&r=1&w=2
-- 
Regards,
Nishanth Menon



More information about the linux-arm-kernel mailing list