[PATCH] ASoC: samsung: Allow setting OP_CLK of the IIS Multi Audio Interface

Tushar Behera tushar.behera at linaro.org
Tue May 20 03:01:24 PDT 2014


On 05/20/2014 02:40 PM, Sylwester Nawrocki wrote:
> On 20/05/14 07:14, Tushar Behera wrote:
>> On 05/19/2014 11:00 PM, Sylwester Nawrocki wrote:
>>> This patch adds support for setting source clock of the "Core CLK"
>>> of the IIS Multi Audio Interface.
>>>
>>> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
>>> ---
>>>  sound/soc/samsung/i2s.c |    4 ++++
>>>  sound/soc/samsung/i2s.h |    1 +
>>>  2 files changed, 5 insertions(+)
>>>
>>> diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
>>> index 048ead9..ae02811 100644
>>> --- a/sound/soc/samsung/i2s.c
>>> +++ b/sound/soc/samsung/i2s.c
>>> @@ -451,6 +451,10 @@ static int i2s_set_sysclk(struct snd_soc_dai *dai,
>>>  	u32 mod = readl(i2s->addr + I2SMOD);
>>>  
>>>  	switch (clk_id) {
>>> +	case SAMSUNG_I2S_OPCLK:
>>> +		mod &= ~MOD_OPCLK_MASK;
>>> +		mod |= dir;
>>
>> I am assuming here that dir is one of SND_SOC_CLOCK_IN or
>> SND_SOC_CLOCK_OUT. In that case, you need to take care of offset (30).
> 
> And that's not a correct assumption. I also got similarly confused when 
> first seeing this in our downstream kernels. 'dir' is supposed to be one 
> of the MOD_OPCLK_* constants, as defined in sound/soc/samsung/i2s-regs.h.
> 
> #define MOD_OPCLK_CDCLK_OUT	(0 << 30)
> #define MOD_OPCLK_CDCLK_IN	(1 << 30)
> #define MOD_OPCLK_BCLK_OUT	(2 << 30)
> #define MOD_OPCLK_PCLK		(3 << 30)
> #define MOD_OPCLK_MASK		(3 << 30)
> 
> So the clock is reconfigured with calls like:
> snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_OPCLK, 0, MOD_OPCLK_PCLK);
> 

Ok.

>> Also the value of this bit-field doesn't match with SND_SOC_CLOCK_XXX
>> macros.
>>
>> Bit-field (2'b):
>> 00	Codec Clock out
>> 01	Codec Clock in
>> 10	Bit clock out
>> 11	Audio bus clock
>>
>> Value of macros:
>> SND_SOC_CLOCK_IN	0
>> SND_SOC_CLOCK_OUT	1
> 
>> In the manual, this field is suggested to be Audio bus clock always. Is
>> there an use-case where we might need to update this?
> 
> I've checked couple boards and AFAICS we're always setting MOD_OPCLK_PCLK,
> however it's still different from the default value after reset - 
> MOD_OPCLK_CDCLK_OUT. 
> So how do you think this should be addressed ? Isn't it better to give
> options to the machine drivers to alter these clock settings, rather than
> hard coding it in the I2S driver ? Let's not forget it covers multiple 
> Samsung SoC series.
> 

I don't have any objection to this patch. Just that, I could not find
any use-case where we would not like to set the value as MOD_OPCLK_PCLK.

>> The default value for audio playback right now is 00 (2'b), which needs
>> to be fixed anyways.
> 
> --
> Regards,
> Sylwester
> 


-- 
Tushar Behera



More information about the linux-arm-kernel mailing list