[PATCH RFC 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs

Mike Turquette mturquette at linaro.org
Fri May 16 16:04:06 PDT 2014


Quoting Tomasz Figa (2014-05-15 10:32:30)
> This patch introduces a driver that handles configuration of CLKOUT pin
> of Exynos SoCs that can be used to output certain clocks from inside of
> the SoC to a dedicated output pin.
> 
> Signed-off-by: Tomasz Figa <t.figa at samsung.com>

Overall implementation looks good to me. Nice solution for exposing
these pins to external ICs.

Regards,
Mike

> ---
>  .../devicetree/bindings/arm/samsung/pmu.txt        |  18 ++++
>  drivers/clk/samsung/Makefile                       |   1 +
>  drivers/clk/samsung/exynos-clkout.c                | 107 +++++++++++++++++++++
>  3 files changed, 126 insertions(+)
>  create mode 100644 drivers/clk/samsung/exynos-clkout.c
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> index b562634..67c7272 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> @@ -11,8 +11,26 @@ Properties:
>  
>   - reg : offset and length of the register set.
>  
> + - #clock-cells : must be zero.
> +
> + - clock-names : list of clock names for particular CLKOUT mux inputs in
> +               following format:
> +                       "clkoutN", where N is a decimal number corresponding to
> +                       CLKOUT mux control bits value for given input, e.g.
> +                               "clkout0", "clkout7", "clkout15".
> +
> + - clocks : list of phandles and specifiers to all input clocks listed in
> +               clock-names property.
> +
>  Example :
>  pmu_system_controller: system-controller at 10040000 {
>         compatible = "samsung,exynos5250-pmu", "syscon";
>         reg = <0x10040000 0x5000>;
> +       #clock-cells = <0>;
> +       clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> +                       "clkout4", "clkout8", "clkout9";
> +       clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> +               <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> +               <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> +               <&clock CLK_XUSBXTI>;
>  };
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 2cb62f8..3c40362 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_EXYNOS5250)    += clk-exynos5250.o
>  obj-$(CONFIG_SOC_EXYNOS5420)   += clk-exynos5420.o
>  obj-$(CONFIG_SOC_EXYNOS5440)   += clk-exynos5440.o
>  obj-$(CONFIG_ARCH_EXYNOS)      += clk-exynos-audss.o
> +obj-$(CONFIG_ARCH_EXYNOS)      += exynos-clkout.o
>  obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
>  obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
>  obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> diff --git a/drivers/clk/samsung/exynos-clkout.c b/drivers/clk/samsung/exynos-clkout.c
> new file mode 100644
> index 0000000..461f1c3
> --- /dev/null
> +++ b/drivers/clk/samsung/exynos-clkout.c
> @@ -0,0 +1,107 @@
> +/*
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * Author: Tomasz Figa <t.figa at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Clock driver for Exynos clock output
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/syscore_ops.h>
> +
> +#define EXYNOS_CLKOUT_PARENTS          32
> +
> +#define EXYNOS_PMU_DEBUG_REG           0xa00
> +#define EXYNOS_CLKOUT_DISABLE_SHIFT    0
> +#define EXYNOS_CLKOUT_MUX_SHIFT                8
> +#define EXYNOS_CLKOUT_MUX_MASK         0x1f
> +
> +static DEFINE_SPINLOCK(clkout_lock);
> +
> +static void __init exynos_clkout_init(struct device_node *node)
> +{
> +       const char *parent_names[EXYNOS_CLKOUT_PARENTS];
> +       struct clk *parents[EXYNOS_CLKOUT_PARENTS];
> +       struct clk_gate *gate;
> +       struct clk_mux *mux;
> +       int parent_count;
> +       struct clk *clk;
> +       void *reg;
> +       int i;
> +
> +       /* allocate mux and gate clock structs */
> +       mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
> +       if (!mux)
> +               return;
> +
> +       gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
> +       if (!gate)
> +               goto free_mux;
> +
> +       parent_count = 0;
> +       for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i) {
> +               char name[] = "clkoutXX";
> +
> +               snprintf(name, sizeof(name), "clkout%d", i);
> +               parents[i] = of_clk_get_by_name(node, name);
> +               if (IS_ERR(parents[i])) {
> +                       parent_names[i] = "none";
> +                       continue;
> +               }
> +
> +               parent_names[i] = __clk_get_name(parents[i]);
> +               parent_count = i + 1;
> +       }
> +
> +       if (!parent_count)
> +               goto free_gate;
> +
> +       reg = of_iomap(node, 0);
> +       if (!reg)
> +               goto clks_put;
> +
> +       gate->reg = reg + EXYNOS_PMU_DEBUG_REG;
> +       gate->bit_idx = EXYNOS_CLKOUT_DISABLE_SHIFT;
> +       gate->flags = CLK_GATE_SET_TO_DISABLE;
> +       gate->lock = &clkout_lock;
> +
> +       mux->reg = reg + EXYNOS_PMU_DEBUG_REG;
> +       mux->mask = EXYNOS_CLKOUT_MUX_MASK;
> +       mux->shift = EXYNOS_CLKOUT_MUX_SHIFT;
> +       mux->lock = &clkout_lock;
> +
> +       clk = clk_register_composite(NULL, "clkout", parent_names,
> +                                       parent_count, &mux->hw,
> +                                       &clk_mux_ops, NULL, NULL, &gate->hw,
> +                                       &clk_gate_ops, 0);
> +       if (IS_ERR(clk))
> +               goto err_unmap;
> +
> +       of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +
> +       return;
> +
> +err_unmap:
> +       iounmap(reg);
> +clks_put:
> +       for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i)
> +               if (!IS_ERR(parents[i]))
> +                       clk_put(parents[i]);
> +free_gate:
> +       kfree(gate);
> +free_mux:
> +       kfree(mux);
> +
> +       pr_err("%s: failed to register clkout clock\n", __func__);
> +}
> +CLK_OF_DECLARE(exynos4210_clkout, "samsung,exynos4210-pmu", exynos_clkout_init);
> +CLK_OF_DECLARE(exynos4412_clkout, "samsung,exynos4x12-pmu", exynos_clkout_init);
> +CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu", exynos_clkout_init);
> +CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu", exynos_clkout_init);
> -- 
> 1.9.2
> 



More information about the linux-arm-kernel mailing list