[PATCH 0/3] Update the Keymile kirkwood DTS files

Valentin Longchamp valentin.longchamp at keymile.com
Thu May 15 02:48:52 PDT 2014


This series resynchs the Keymile Kirkwood DTS files with mainline since
the boards do not boot anymore with the 3.15 rc kernels (to be honest, I
have not tested the last 2-3 releases).

The changes are the addition of the PCIe controller for the 98dx4122
SoC, the explicit disabling of the SATA phys for this same SoC and
finally the enabling of the PCIe controller on the Keymile Reference
design.

The series also adds a new DTS for another Keymile generic design where
the mv64xxx eth interace is configured with fixed parameters to no phy
but a switch (for board internal communication).

The series applies and was tested on top of Jason's mvebu/dt branch
(mvebu-dt-3.16 tag).


Valentin Longchamp (3):
  ARM: dts: kirkwood: resynch 98dx4122 dtsi
  ARM: dts: kirkwood: enable the PCIe for km_kirkwood
  ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file

 arch/arm/boot/dts/kirkwood-98dx4122.dtsi   | 43 ++++++++++++++++++
 arch/arm/boot/dts/kirkwood-km_fixedeth.dts | 70 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 10 +++++
 3 files changed, 123 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-km_fixedeth.dts

-- 
1.8.0.1




More information about the linux-arm-kernel mailing list