[PATCH v2 06/11] dt-bindings: add documentation for rk3188 clock and reset unit

Heiko Stübner heiko at sntech.de
Wed May 7 14:14:10 PDT 2014


This add bindings documentation for the clock and reset unit found on
rk3188 SoCs from Rockchip.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 .../bindings/clock/rockchip,rk3188-cru.txt         | 74 ++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 0000000..8165c0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,74 @@
+* Rockchip RK3188 Clock and Reset Unit
+
+The RK3188 clock controller generates and supplies clock to various controllers
+within the SoC and also implements a reset controller for SoC peripherals.
+There exist two variants of the rk3188 SoC, the rk3188 and rk3188a, with
+slight differences in the pll handling.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru" or "rockchip,rk3188a-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region. The first element should be the cru register space and the second
+  element should be the address of the GRF_SOC_STATUS register providing the
+  pll lock status.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+- rockchip,armclk-divider-table: when the frequency of the APLL is changed
+  some core divider clocks also need to be updated. These divider clocks have
+  SoC specific divider clock output requirements for a specific APLL clock
+  speeds. When APLL clock rate is changed, these divider clocks are
+  reprogrammed with pre-determined values in order to maintain the SoC
+  specific divider clock outputs. This property lists the divider values
+  for these clocks for supported APLL clock speeds.
+  The format of each entry included in the arm-frequency-table should be
+  defined as
+
+      cell #1: arm clock parent frequency
+      cell #2 ~ cell 3#: value of clock divider of core_peri and aclk_core.
+
+- #rockchip,armclk-cells: defines the number of cells in
+  rockchip,armclk-divider-table property. The value of this property depends on
+  the SoC type. For RK3188 SoCs it should be 3.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in dt-bindings/clock/rk3188-cru.h header and can be used
+in device tree sources.
+
+External clocks:
+
+The basic input clock is generated outside the SoC. It is expected that it is
+defined using standard clock bindings with a clock-output-name of "xin24m".
+
+Example: Clock controller node:
+
+	cru: cru at 20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>,
+		      <0x200080ac 0x4>;
+
+		#clock-cells = <1>;
+
+		#rockchip,armclk-cells = <3>;
+		rockchip,armclk-divider-table =	<1608000 2 3>,
+						<1416000 2 3>,
+						<1200000 2 3>,
+						<1008000 2 3>,
+						< 816000 2 3>,
+						< 504000 1 3>,
+						< 312000 0 1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial at 10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
-- 
1.9.0





More information about the linux-arm-kernel mailing list