[PATCH v3 1/2] i2c: Add driver for Cadence I2C controller

[Michal Simek]

On 03/11/2014 05:50 PM, Soren Brinkmann wrote:
> Add a driver for the Cadence I2C controller. This controller is for
> example found in Xilinx Zynq.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
> ---
> v3:
>  - incorporate signal handling changes from Mike Looijmans
>    <mike.looijmans at topic.nl> (https://lkml.org/lkml/2014/3/11/64)
> v2:
>  - make driver depend on COMMON_CLK instead of ARCH_ZYNQ
> ---
>  .../devicetree/bindings/i2c/i2c-cadence.txt        |  21 +
>  MAINTAINERS                                        |   1 +
>  drivers/i2c/busses/Kconfig                         |   7 +
>  drivers/i2c/busses/Makefile                        |   1 +
>  drivers/i2c/busses/i2c-cadence.c                   | 898 +++++++++++++++++++++
>  5 files changed, 928 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence.txt
>  create mode 100644 drivers/i2c/busses/i2c-cadence.c

For boot test on zynq zc702 3.14.0-rc6.
Tested-by: Michal Simek <michal.simek at xilinx.com>

Thanks,
Michal