[PATCH 47/62] ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1

[Kukjin Kim]

Arnd Bergmann wrote:
> 
> This board uses both MMC controllers, so we need to enable
> the Kconfig option to define the platform data.
> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Cc: Tomasz Figa <tomasz.figa at gmail.com>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Ben Dooks <ben-linux at fluff.org>
> ---
>  arch/arm/mach-s3c64xx/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index 64f04e6..92885d7 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -87,6 +87,7 @@ config MACH_SMDK6400
>  	select CPU_S3C6400
>  	select S3C64XX_SETUP_SDHCI
>  	select S3C_DEV_HSMMC
> +	select S3C_DEV_HSMMC1
>  	select S3C_DEV_NAND

Well, only HSMMC ch1 is used on smdk6400 and S3C_DEV_NAND is not needed.

So should be following:

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 64f04e6..3136d86 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -86,8 +86,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
+	select S3C_DEV_HSMMC1
 	help
 	  Machine support for the Samsung SMDK6400

Thanks,
Kukjin

>  	help
>  	  Machine support for the Samsung SMDK6400
> --
> 1.8.3.2