[PATCH 5/9] Doc/DT: Add DT binding documentation for MIPI DPI Panel

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Mar 17 10:19:32 EDT 2014


Hi Tomi,

Thank you for the patch.

On Friday 28 February 2014 14:20:12 Tomi Valkeinen wrote:
> Add DT binding documentation for MIPI DPI Panel.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Reviewed-by: Archit Taneja <archit at ti.com>
> ---
>  .../devicetree/bindings/video/panel-dpi.txt        | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/panel-dpi.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt
> b/Documentation/devicetree/bindings/video/panel-dpi.txt new file mode
> 100644
> index 000000000000..72636c6f1c67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/panel-dpi.txt
> @@ -0,0 +1,43 @@
> +Generic MIPI DPI Panel
> +======================
> +
> +Required properties:
> +- compatible: "panel-dpi"
> +
> +Optional properties:
> +- label: a symbolic name for the panel
> +- gpios: panel enable gpio and backlight enable gpio

While integrated in the panel module, the backlight is a separate piece of 
hardware, which could be controlled through other means (I2C for instance). 
Wouldn't it be better to add an explicit DT node for the backlight device and 
reference that node from the panel node ?

> +
> +Required nodes:
> +- "panel-timing" containing video timings
> +  (Documentation/devicetree/bindings/video/display-timing.txt)
> +- Video port for DPI input
> +
> +Example
> +-------
> +
> +lcd0: display at 0 {
> +        compatible = "samsung,lte430wq-f0c", "panel-dpi";
> +        label = "lcd";
> +
> +        lcd_in: endpoint {
> +                remote-endpoint = <&dpi_out>;
> +        };
> +
> +        panel-timing {
> +                clock-frequency = <9200000>;
> +                hactive = <480>;
> +                vactive = <272>;
> +                hfront-porch = <8>;
> +                hback-porch = <4>;
> +                hsync-len = <41>;
> +                vback-porch = <2>;
> +                vfront-porch = <4>;
> +                vsync-len = <10>;
> +
> +                hsync-active = <0>;
> +                vsync-active = <0>;
> +                de-active = <1>;
> +                pixelclk-active = <1>;
> +        };
> +};

-- 
Regards,

Laurent Pinchart




More information about the linux-arm-kernel mailing list