[PATCH 11/16] ARM: mvebu: dts: Add CA9 MPcore SoC Controller node

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Mon Jun 30 08:37:55 PDT 2014


Gregory,

On Fri, 27 Jun 2014 15:22:52 +0200, Gregory CLEMENT wrote:
> The CA9 MPcore SoC Control block allows to do some configuration that
> the SoC could use for a specific use case. In most cases the defaults
> case is enough. However there is few exception: for cpuidle we need to
> use the CA9 MPcore Reset Control register.

I'd reword this to something like:

"""
The CA9 MPcore SoC Control block is a set of registers that allows to
configure certain internal aspects of the core blocks of the SoC
(Cortex-A9, L2 cache controller, etc.). In most cases, the default
values are fine so they aren't many reasons to touch those registers,
but there is one exception: to support cpuidle on Armada 38x, we need
to modify the value of the CA9 MPcore Reset Control register.

Therefore, this commit adds a new Device Tree binding for this hardware
block, and uses this new binding for the Armada 38x Device Tree file.

"""

> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> Cc: devicetree at vger.kernel.org
> ---
>  .../devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt | 14 ++++++++++++++
>  arch/arm/boot/dts/armada-38x.dtsi                          |  5 +++++
>  2 files changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
> new file mode 100644
> index 000000000000..0a2df51ba560
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
> @@ -0,0 +1,14 @@
> +Marvell Armada 38x CA9 MPcore SoC Controller
> +============================================
> +
> +Required properties:
> +
> +- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
> +
> +- reg: should be register base and length as documented in the

should be *the* register base and length

> +  datasheet for the CA9 MPcore SoC Control registers
> +
> +mpcore-soc-ctrl at 20d20 {
> +	compatible = "marvell,armada-380-mpcore-soc-ctrl";
> +	reg = <0x20d20 0x6c>;
> +};
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 689fa1a46728..242d0ecc99f3 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -286,6 +286,11 @@
>  				reg = <0x20800 0x10>;
>  			};
>  
> +			mpcore-soc-ctrl at 20d20 {
> +				compatible = "marvell,armada-380-mpcore-soc-ctrl";
> +				reg = <0x20d20 0x6c>;
> +			};
> +
>  			coherency-fabric at 21010 {
>  				compatible = "marvell,armada-380-coherency-fabric";
>  				reg = <0x21010 0x1c>;

With those fixed:

Reviewed-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com



More information about the linux-arm-kernel mailing list