[PATCH v2] i2c: s3c2410: resume the I2C controller earlier

Doug Anderson dianders at chromium.org
Tue Jun 24 16:56:54 PDT 2014


From: Vincent Palatin <vpalatin at chromium.org>

When the wake-up is triggered by the PMIC RTC, the RTC driver is trying
to read the PMIC interrupt status over I2C and fails because the I2C
controller is not resumed yet.
Let's resume the I2C controller earlier in the _noirq phase
(as other hardwares are doing), so we can properly get the wake-up
condition.

Signed-off-by: Vincent Palatin <vpalatin at chromium.org>
Signed-off-by: Doug Anderson <dianders at chromium.org>
---
Changes in v2:
- Added missing freeze/thaw/poweroff/restore

 drivers/i2c/busses/i2c-s3c2410.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e828a1d..ecb389c 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1267,7 +1267,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 	return 0;
 }
 
-static int s3c24xx_i2c_resume(struct device *dev)
+static int s3c24xx_i2c_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
@@ -1285,7 +1285,11 @@ static int s3c24xx_i2c_resume(struct device *dev)
 static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
 #ifdef CONFIG_PM_SLEEP
 	.suspend_noirq = s3c24xx_i2c_suspend_noirq,
-	.resume = s3c24xx_i2c_resume,
+	.resume_noirq = s3c24xx_i2c_resume_noirq,
+	.freeze_noirq = s3c24xx_i2c_suspend_noirq,
+	.thaw_noirq = s3c24xx_i2c_resume_noirq,
+	.poweroff_noirq = s3c24xx_i2c_suspend_noirq,
+	.restore_noirq = s3c24xx_i2c_resume_noirq,
 #endif
 };
 
-- 
2.0.0.526.g5318336




More information about the linux-arm-kernel mailing list