[PATCHv4 2/4] ARM: Kirkwood: Add DT descriptions for net2big and net5big.

[Simon Guinot]

On Mon, May 26, 2014 at 09:29:49PM +0200, Andrew Lunn wrote:
> Describe LaCie 2Big and 5Big Network v2 using device tree.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> ---
> v1->v2
> Fix size of memory
> Clean up ethernet nodes
> s/at/atmel/
> 
> v2->v3
> gpio_poweroff->gpio-poweroff
> gpio_key->gpio-key
> s/ok/okay
> Remove spi pinctrl properties.
> 
> v3->v4
> Add _v2 to compatible name of devices
> Fix SoC version to 6281
> tabification of DT files
> Add fan controller and clock node for fan controller
> ---
>  arch/arm/boot/dts/Makefile              |   2 +
>  arch/arm/boot/dts/kirkwood-net2big.dts  |  30 ++++++
>  arch/arm/boot/dts/kirkwood-net5big.dts  |  83 +++++++++++++++
>  arch/arm/boot/dts/kirkwood-netxbig.dtsi | 180 ++++++++++++++++++++++++++++++++
>  4 files changed, 295 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-net2big.dts
>  create mode 100644 arch/arm/boot/dts/kirkwood-net5big.dts
>  create mode 100644 arch/arm/boot/dts/kirkwood-netxbig.dtsi

...

> diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
> new file mode 100644
> index 000000000000..f665fcd6005b
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-net5big.dts
> @@ -0,0 +1,83 @@
> +/*
> + * Device Tree file for LaCie 5Big Network v2
> + *
> + * Copyright (C) 2014
> + *
> + * Andrew Lunn <andrew at lunn.ch>
> + *
> + * Based on netxbig_v2-setup.c,
> + * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> +*/
> +
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +#include "kirkwood-netxbig.dtsi"
> +
> +/ {
> +	model = "LaCie 5Big Network v2";
> +	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";

"lacie,net2big_v2" must be replaced with "lacie,net5big_v2".

> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x20000000>;
> +	};
> +
> +};
> +
> +&regulators {
> +	regulator at 3 {
> +		compatible = "regulator-fixed";
> +		reg = <3>;
> +		regulator-name = "hdd2power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;

19 must be replaced with 9.

> +	};
> +
> +	regulator at 4 {
> +		compatible = "regulator-fixed";
> +		reg = <4>;
> +		regulator-name = "hdd3power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;

20 must be replaced with 10.

> +	};
> +
> +	regulator at 5 {
> +		compatible = "regulator-fixed";
> +		reg = <5>;
> +		regulator-name = "hdd4power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;

21 must be replaced with 11.

Andrew, with all this changes, I can confirm that the 2Big and 5Big
Network v2 boards are working as expected.

Tested-by: Simon Guinot <simon.guinot at sequanux.org>

Thanks,

Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140621/b67ac049/attachment.sig>