[PATCH v2 2/8] PCI: designware: refactor host init code to re-use on v3.65 DW pci hw

Murali Karicheri m-karicheri2 at ti.com
Fri Jun 20 11:47:58 PDT 2014


On 6/18/2014 3:05 AM, Pratyush Anand wrote:
> Hi Murali,
>
> On Wed, Jun 11, 2014 at 02:51:21AM +0800, Murali Karicheri wrote:
>> Current DW PCI host init code has code specific to newer hw such as
>> ATU port specific resource parsing and map. v3.65 DW PCI host has
> OK, Older version did not had standard viewport implementation, so patch 1
> of this series will help you to take care for that.
>
>> MSI controller in application space and requires different controller
> Since MSI controller is implemented in application space, so this may
> not be same for different older version dw controller users.
>
> Therefore, I would suggest to implement all application specific code
> in your keystone driver only.
Pratyush,

Thanks for the comments.

This is IP specific code and another driver that has this version of the 
IP will be able to
re-use the code. This is also being discussed in another thread from 
Bjorn and Jingoo.
Please discuss this in that thread.

>> initialization code. So refactor the msi host controller code into a
>> separate function. Other common functions across both hw versions
>> are moved to dw_pcie_common_host_init() and called from the newer and
>> v3.65 hw host initialization code.
>>
>> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
>>
>> CC: Santosh Shilimkar <santosh.shilimkar at ti.com>
>> CC: Russell King <linux at arm.linux.org.uk>
>> CC: Grant Likely <grant.likely at linaro.org>
>> CC: Rob Herring <robh+dt at kernel.org>
>> CC: Mohit Kumar <mohit.kumar at st.com>
>> CC: Jingoo Han <jg1.han at samsung.com>
>> CC: Bjorn Helgaas <bhelgaas at google.com>
>> CC: Pratyush Anand <pratyush.anand at st.com>
>> CC: Richard Zhu <r65037 at freescale.com>
>> CC: Kishon Vijay Abraham I <kishon at ti.com>
>> CC: Marek Vasut <marex at denx.de>
>> CC: Arnd Bergmann <arnd at arndb.de>
>> CC: Pawel Moll <pawel.moll at arm.com>
>> CC: Mark Rutland <mark.rutland at arm.com>
>> CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
>> CC: Kumar Gala <galak at codeaurora.org>
>> CC: Randy Dunlap <rdunlap at infradead.org>
>> CC: Grant Likely <grant.likely at linaro.org>
>>
>> ---
>>   drivers/pci/host/pcie-designware.c |  136 ++++++++++++++++++++++++++----------
>>   1 file changed, 101 insertions(+), 35 deletions(-)
>>
>> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
>> index e8f5d8d..e4bd19a 100644
>> --- a/drivers/pci/host/pcie-designware.c
>> +++ b/drivers/pci/host/pcie-designware.c
>> @@ -389,13 +389,19 @@ static const struct irq_domain_ops msi_domain_ops = {
>>   	.map = dw_pcie_msi_map,
>>   };
>>   
>> -int __init dw_pcie_host_init(struct pcie_port *pp)
>> +/*
>> + * dw_pcie_parse_resource() - Function to parse common resources
>> + *
>> + * @pp: ptr to pcie port
>> + *
>> + * Parse the range property for MEM, IO and cfg resources, and map
>> + * the cfg register space.
>> + */
> Why do you need this function? If you have some extra resource, you
> can ioremap that before you call dw_pcie_host_init.

I assume you are referring to dw_pcie_parse_resource(). Keystone PCIe 
driver needs
this to parse the range property for IORESOURCE_MEM and IORESOURCE_IO 
resources.
So refactored this into a function and called from host_init()
code for v3.65 and dw_pcie_host_init . But for Keystone PCI driver, no 
need to ioremap
cfg1 and cfg2 as it doesn't have ATU ports. So host_init() code has to 
be little different.
Idea is to have IP specific host_init() and refactor and re-use the 
common code on both.

>
>> +int __init dw_pcie_parse_resource(struct pcie_port *pp)
>>   {
>>   	struct device_node *np = pp->dev->of_node;
>>   	struct of_pci_range range;
>>   	struct of_pci_range_parser parser;
>> -	u32 val;
>> -	int i;
>>   
>>   	if (of_pci_range_parser_init(&parser, np)) {
>>   		dev_err(pp->dev, "missing ranges property\n");
>> @@ -431,41 +437,29 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>>   			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
>>   		}
>>   	}
>> -
>> -	if (!pp->dbi_base) {
>> -		pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start,
>> -					resource_size(&pp->cfg));
>> -		if (!pp->dbi_base) {
>> -			dev_err(pp->dev, "error with ioremap\n");
>> -			return -ENOMEM;
>> -		}
>> -	}
>> -
>> -	pp->cfg0_base = pp->cfg.start;
>> -	pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
>>   	pp->mem_base = pp->mem.start;
>>   
>> -	pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
>> -					pp->config.cfg0_size);
>> -	if (!pp->va_cfg0_base) {
>> -		dev_err(pp->dev, "error with ioremap in function\n");
>> -		return -ENOMEM;
>> -	}
>> -	pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
>> -					pp->config.cfg1_size);
>> -	if (!pp->va_cfg1_base) {
>> -		dev_err(pp->dev, "error with ioremap\n");
>> -		return -ENOMEM;
>> -	}
>> +	return 0;
>> +}
>>   
>> -	if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
>> -		dev_err(pp->dev, "Failed to parse the number of lanes\n");
>> -		return -EINVAL;
>> -	}
>> +/*
>> + * dw_pcie_msi_host_init() - Function to initialize msi host controller
>> + *
>> + * @pp: ptr to pcie port
>> + * @np: device node ptr to msi irq controller
>> + * @irq_msi_ops: ptr to MSI irq_domain_ops struct
>> + *
>> + * Function register irq domain for msi irq controller and create mappings
>> + * for MSI irqs.
>> + */
>
> May be you can only do following to support your MSI chip:
>
> Initialize pp->irq_domain into your add_pcie_port function before you
> call dw_pcie_host_init.
>
> In dw_pcie_host_init,
>
> if (IS_ENABLED(CONFIG_PCI_MSI) && !pp->irq_domain)

How do I pass the keystone specific msi irq_domain_ops? It looks clean 
the way it is implemented
in this patch. Also since MSI host controller and legacy host controller 
are different, it make
sense to add separate host_init for each. Let me know.

Regards,

Murali

>
>> +int dw_pcie_msi_host_init(struct pcie_port *pp, struct device_node *np,
>> +				const struct irq_domain_ops *irq_msi_ops)
>> +{
>> +	int i;
>>   
>>   	if (IS_ENABLED(CONFIG_PCI_MSI)) {
>>   		pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
>> -					MAX_MSI_IRQS, &msi_domain_ops,
>> +					MAX_MSI_IRQS, irq_msi_ops,
>>   					&dw_pcie_msi_chip);
>>   		if (!pp->irq_domain) {
>>   			dev_err(pp->dev, "irq domain init failed\n");
>> @@ -476,6 +470,29 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>>   			irq_create_mapping(pp->irq_domain, i);
>>   	}
>>   
>> +	return 0;
>> +}
>> +
>> +/*
>> + * dw_pcie_common_host_init() - common host init function across different
>> + *				versions of the designware PCI controller.
>> + * @pp: ptr to pcie port
>> + * @hw: ptr to hw_pci structure
>> + *
>> + * This functions parses common DT properties, call host_init() callback
>> + * of the PCI controller driver. Also initialize the common RC configurations
>> + * and call common pci core function to intialize the controller driver.
>> + */
>> +int __init dw_pcie_common_host_init(struct pcie_port *pp, struct hw_pci *hw)
>> +{
>> +	struct device_node *np = pp->dev->of_node;
>> +	u32 val;
>> +
>> +	if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
>> +		dev_err(pp->dev, "Failed to parse the number of lanes\n");
>> +		return -EINVAL;
>> +	}
>> +
>>   	if (pp->ops->host_init)
>>   		pp->ops->host_init(pp);
>>   
>> @@ -488,10 +505,10 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>>   	val |= PORT_LOGIC_SPEED_CHANGE;
>>   	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
>>   
>> -	dw_pci.nr_controllers = 1;
>> -	dw_pci.private_data = (void **)&pp;
>> +	hw->nr_controllers = 1;
>> +	hw->private_data = (void **)&pp;
>>   
>> -	pci_common_init_dev(pp->dev, &dw_pci);
>> +	pci_common_init_dev(pp->dev, hw);
>>   	pci_assign_unassigned_resources();
>>   #ifdef CONFIG_PCI_DOMAINS
>>   	dw_pci.domain++;
>> @@ -500,6 +517,55 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>>   	return 0;
>>   }
>>   
>> +/*
>> + * dw_pcie_host_init() - Host init function for new designware h/w
>> + *
>> + * @pp: ptr to pcie port
>> + *
>> + * The function parse the PCI resurces for IO, Memory and map the config
>> + * space addresses. Also initliaze the MSI irq controller and call
>> + * dw_pcie_common_host_init() to initialize the PCI controller.
>> + */
>> +int __init dw_pcie_host_init(struct pcie_port *pp)
>> +{
>> +	int ret;
>> +
>> +	ret = dw_pcie_parse_resource(pp);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (!pp->dbi_base) {
>> +		pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start,
>> +					resource_size(&pp->cfg));
>> +		if (!pp->dbi_base) {
>> +			dev_err(pp->dev, "error with ioremap\n");
>> +			return -ENOMEM;
>> +		}
>> +	}
>> +
>> +	pp->cfg0_base = pp->cfg.start;
>> +	pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
>> +
>> +	pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
>> +					pp->config.cfg0_size);
>> +	if (!pp->va_cfg0_base) {
>> +		dev_err(pp->dev, "error with ioremap in function\n");
>> +		return -ENOMEM;
>> +	}
>> +	pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
>> +					pp->config.cfg1_size);
>> +	if (!pp->va_cfg1_base) {
>> +		dev_err(pp->dev, "error with ioremap\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	ret = dw_pcie_msi_host_init(pp, pp->dev->of_node, &msi_domain_ops);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return dw_pcie_common_host_init(pp, &dw_pci);
>> +}
>> +
>>   static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
>>   {
>>   	/* Program viewport 0 : OUTBOUND : CFG0 */
> Regards
> Pratyush
>
>> -- 
>> 1.7.9.5




More information about the linux-arm-kernel mailing list