[PATCH RFC 1/9] irqchip: gic: Provide support for interrupt grouping

[Marek Vasut]

On Monday, July 21, 2014 at 04:47:12 PM, Daniel Thompson wrote:
> All GIC hardware except GICv1-without-TrustZone support provides a means
> to group exceptions into group 0 (which can optionally be signally using
> use FIQ) and group 1. The kernel currently provides no means to exploit
> this. This patch alters the initialization of the GIC to place all
> interrupts into group 1 which is the foundational requirement to
> meaningfully use FIQ.

[...]

> @@ -670,7 +753,11 @@ static void gic_raise_softirq(const struct cpumask
> *mask, unsigned int irq) dmb(ishst);
> 
>  	/* this always happens on GIC0 */
> -	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) +
> GIC_DIST_SOFTINT); +	softint = map << 16 | irq;
> +	if (gic_data_fiq_enable(&gic_data[0]))
> +		softint |= 0x8000;

These magic bits here could use some clarification, possibly a comment.

> +	writel_relaxed(softint,
> +		       gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
> 
>  	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
>  }
[...]

Best regards,
Marek Vasut