[PATCH v5 4/8] ARM: shmobile: r7s72100: Add MTU2 device to DT

[Laurent Pinchart]

Hi Simon,

On Tuesday 15 July 2014 20:47:41 Simon Horman wrote:
> On Wed, Jul 09, 2014 at 03:12:40PM +0200, Laurent Pinchart wrote:
> > Add the MTU2 counter to the r7s72100 device tree and make it disabled by
> > default.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > 
> >  arch/arm/boot/dts/r7s72100.dtsi | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r7s72100.dtsi
> > b/arch/arm/boot/dts/r7s72100.dtsi index bdee225..c902b0b 100644
> > --- a/arch/arm/boot/dts/r7s72100.dtsi
> > +++ b/arch/arm/boot/dts/r7s72100.dtsi
> > @@ -229,6 +229,16 @@
> >  		status = "disabled";
> >  	};
> > 
> > +	mtu2: timer at fcff0000 {
> > +		compatible = "renesas,mtu2";
> > +		reg = <0xfcff0000 0x400>;
> > +		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
> > +		interrupt-names = "tgi0a";
> > +		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
> > +		clock-names = "fck";
> > +		status = "disabled";
> > +	};
> > +
> >  	scif0: serial at e8007000 {
> >  		compatible = "renesas,scif-r7s72100", "renesas,scif";
> >  		reg = <0xe8007000 64>;
> 
> I believe that I claimed to have tested this in the past but that
> my testing was by booting a config to userspace that as it happens
> did not require to timer to get that far.
> 
> I now believe there is a minor error: the interrupt number should be
> (139 - 32 =) 107 rather than 139.
> 
> This allows a system with this and the related genmai patch applied
> on top of renesas-next-v3.16-rc3-20140715 to boot to uerspace
> when compiled with shmobile_defconfig (+ an initrd).
> Without the irq number change the boot gets stuck in
> ip_auto_config (which presumably sleeps).
> 
> Laurent, should I squash the following in and queue-up the result?

Please do, and sorry for the mistake.

> diff --git a/arch/arm/boot/dts/r7s72100.dtsi
> b/arch/arm/boot/dts/r7s72100.dtsi index c902b0b..1d28d01 100644
> --- a/arch/arm/boot/dts/r7s72100.dtsi
> +++ b/arch/arm/boot/dts/r7s72100.dtsi
> @@ -232,7 +232,7 @@
>  	mtu2: timer at fcff0000 {
>  		compatible = "renesas,mtu2";
>  		reg = <0xfcff0000 0x400>;
> -		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
>  		interrupt-names = "tgi0a";
>  		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
>  		clock-names = "fck";

-- 
Regards,

Laurent Pinchart