[PATCH v3 0/4] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled

Daniel Drake drake at endlessm.com
Mon Jul 14 08:41:25 PDT 2014


Hi Bartlomiej,

On Wed, Jul 9, 2014 at 6:17 PM, Bartlomiej Zolnierkiewicz
<b.zolnierkie at samsung.com> wrote:
> This patch series adds support for AFTR idle mode on boards with
> secure firmware enabled and allows EXYNOS cpuidle driver usage on
> Exynos4x12 SoCs.
>
> It has been tested on Trats2 board (using Exynos4412 SoC with secure
> firmware enabled) on which AFTR mode reduces power consumption by ~12%
> when EXYNOS cpuidle driver is enabled (in both cases the default
> exynos_defconfig config is used and CPU1-3 are offlined).

Thanks for this, I have tested it on ODROID-U2.

I don't have any equipment to measure the power usage, but after
offlining CPUs 1,2,3 via sysfs "online" file, a printk I added
confirms that the system is going to enter aftr mode, and system
stability seems as good as ever.

Is there any automatic way that the cpus should be offlined, or is the
intention that it must be done "by hand" like this?

Thanks,
Daniel



More information about the linux-arm-kernel mailing list