[PATCH v2 3/4] can: flexcan: switch on clocks before accessing ecr register

[Stefan Agner]

Reported-by: Ashutosh Singh <ashuleapyear at gmail.com>
Suggested-by: Marc Kleine-Budde <mkl at pengutronix.de>
[stefan at agner.ch: added return check for clk_enable_prepare]

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/net/can/flexcan.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index f425ec2..4c598c9 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -383,11 +383,25 @@ static int flexcan_get_berr_counter(const struct net_device *dev,
 {
 	const struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->base;
-	u32 reg = flexcan_read(&regs->ecr);
+	u32 reg, err;
+
+	err = clk_prepare_enable(priv->clk_ipg);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(priv->clk_per);
+	if (err)
+		goto out_disable_ipg;
+
+	reg = flexcan_read(&regs->ecr);
 
 	bec->txerr = (reg >> 0) & 0xff;
 	bec->rxerr = (reg >> 8) & 0xff;
 
+	clk_disable_unprepare(priv->clk_per);
+ out_disable_ipg:
+	clk_disable_unprepare(priv->clk_ipg);
+
 	return 0;
 }
 
-- 
2.0.1