[PATCH v3 2/5] ARM: sun6i: dt: Add PLL6 and SPI module clocks

Maxime Ripard maxime.ripard at free-electrons.com
Fri Jan 31 05:55:49 EST 2014


The module clocks in the A31 are still compatible with the A10 one. Add the SPI
module clocks and the PLL6 in the device tree to allow their use by the SPI
controllers.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 46 ++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..0eea325 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -73,16 +73,12 @@
 			clocks = <&osc24M>;
 		};
 
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		pll6: pll6 {
+		pll6: clk at 01c20028 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6";
 		};
 
 		cpu: cpu at 01c20050 {
@@ -182,6 +178,38 @@
 					"apb2_uart1", "apb2_uart2", "apb2_uart3",
 					"apb2_uart4", "apb2_uart5";
 		};
+
+		spi0_clk: clk at 01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk at 01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk at 01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi2";
+		};
+
+		spi3_clk: clk at 01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi3";
+		};
 	};
 
 	soc at 01c00000 {
-- 
1.8.4.2




More information about the linux-arm-kernel mailing list