[PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU

[Robert Nelson]

On Wed, Jan 29, 2014 at 12:19 PM, Nishanth Menon <nm at ti.com> wrote:
> OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock.
>
> OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use
> dpll_mpu clock.
>
> Latency used is the generic latency defined in omap-cpufreq
> driver.
>
> Signed-off-by: Nishanth Menon <nm at ti.com>

Hi Nishanth,

After this patch, do you see any limitation to finally enabling 1Ghz
operation on the beagle-xm by default? Or are we still missing a
dependicy somewhere?

cpufreq stats: 300 MHz:98.64%, 600 MHz:0.04%, 800 MHz:0.09%, 1000
MHz:1.23%  (11)
full cpufreq output: http://paste.debian.net/79073/

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts
b/arch/arm/boot/dts/omap3-beagle-xm.dts
index bb5dad0..b0e5863 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -16,9 +16,36 @@
        cpus {
                cpu at 0 {
                        cpu0-supply = <&vcc>;
+                       operating-points = <
+                               /* kHz    uV */
+                               300000   1012500
+                               600000   1200000
+                               800000   1325000
+                               1000000  1380000
+                       >;
                };
        };

+       abb: regulator-abb {
+               compatible = "ti,abb-v1";
+               regulator-name = "abb";
+               #address-cell = <0>;
+               #size-cells = <0>;
+               reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+               reg-names = "base-address", "int-address";
+               ti,tranxdone-status-mask = <0x4000000>;
+               clocks = <&dpll1_ck>;
+               ti,settling-time = <30>;
+               ti,clock-cycles = <8>;
+               ti,abb_info = <
+                       /* uV           ABB     efuse   rbb_m   fbb_m
 vset_m */
+                       1012500         0       0       0       0
 0 /* Bypass */
+                       1200000         3       0       0       0
 0 /* RBB mandatory */
+                       1320000         1       0       0       0
 0 /* FBB mandatory */
+                       1380000         1       0       0       0       0
+                       >;
+       };
+
        memory {
                device_type = "memory";
                reg = <0x80000000 0x20000000>; /* 512 MB */
-- 
1.8.5.3

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/