[PATCH 2/2] BCM2835: Add I2S driver to device tree

Florian Meier florian.meier at koalo.de
Mon Jan 13 06:16:40 EST 2014


This adds the definitions for the BCM2835 I2S driver
to the device tree. Some GPIO settings are needed for
the correct pin functions.

Signed-off-by: Florian Meier <florian.meier at koalo.de>
---

Sorry, I forgot to disable word-wrap again....

 arch/arm/boot/dts/bcm2835-rpi-b.dts | 12 +++++++++++-
 arch/arm/boot/dts/bcm2835.dtsi      | 10 ++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2a3b1c1..e83ed2f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -23,7 +23,7 @@
 
 &gpio {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gpioout &alt0 &alt3>;
+	pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>;
 
 	gpioout: gpioout {
 		brcm,pins = <6>;
@@ -39,6 +39,16 @@
 		brcm,pins = <48 49 50 51 52 53>;
 		brcm,function = <7>; /* alt3 */
 	};
+
+	/* I2S interface */
+	alt2: alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <6>; /* alt2 */
+	};
+};
+
+&bcm2835_i2s {
+	status = "okay";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1da6b36..ca2259c 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -134,6 +134,16 @@
 			#dma-cells = <1>;
 			brcm,dma-channel-mask = <0x7f35>;
 		};
+
+		bcm2835_i2s: i2s at 7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+		};
 	};
 
 	clocks {
-- 
1.8.3.2



More information about the linux-arm-kernel mailing list