[PATCH V2 3/4] ARM: shmobile: koelsch: Add QSPI support

[Laurent Pinchart]

Hi Geert,

Thank you for the patch.

On Sunday 12 January 2014 12:00:32 Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
> 
> Enable support for the Spansion s25fl512s SPI FLASH on the Koelsch board:
>   - Add QSPI platform device, resources, platform data, and pinmux,
>   - Add FLASH data and MTD partitions.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at linux-m68k.org>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> V2:
>   - Split in 2 groups (qspi_ctrl/qspi_data4)
> 
>  arch/arm/mach-shmobile/board-koelsch.c |   64
> ++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+)
> 
> diff --git a/arch/arm/mach-shmobile/board-koelsch.c
> b/arch/arm/mach-shmobile/board-koelsch.c index de7cc64b1f37..37e4a6fd36b3
> 100644
> --- a/arch/arm/mach-shmobile/board-koelsch.c
> +++ b/arch/arm/mach-shmobile/board-koelsch.c
> @@ -25,12 +25,17 @@
>  #include <linux/input.h>
>  #include <linux/kernel.h>
>  #include <linux/leds.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
>  #include <linux/phy.h>
>  #include <linux/pinctrl/machine.h>
>  #include <linux/platform_data/gpio-rcar.h>
>  #include <linux/platform_data/rcar-du.h>
>  #include <linux/platform_device.h>
>  #include <linux/sh_eth.h>
> +#include <linux/spi/flash.h>
> +#include <linux/spi/rspi.h>
> +#include <linux/spi/spi.h>
>  #include <mach/common.h>
>  #include <mach/irqs.h>
>  #include <mach/r8a7791.h>
> @@ -148,6 +153,55 @@ static const struct gpio_keys_platform_data
> koelsch_keys_pdata __initconst = { .nbuttons	= ARRAY_SIZE(gpio_buttons),
>  };
> 
> +/* QSPI */
> +static const struct resource qspi_resources[] __initconst = {
> +	DEFINE_RES_MEM(0xe6b10000, 0x1000),
> +	DEFINE_RES_IRQ(gic_spi(184)),
> +};
> +
> +static const struct rspi_plat_data qspi_pdata __initconst = {
> +	.num_chipselect = 1,
> +};
> +
> +/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
> +static struct mtd_partition spi_flash_part[] = {
> +	{
> +		.name		= "loader",
> +		.offset		= 0x00000000,
> +		.size		= 512 * 1024,
> +		.mask_flags	= MTD_WRITEABLE,
> +	},
> +	{
> +		.name		= "bootenv",
> +		.offset		= MTDPART_OFS_APPEND,
> +		.size		= 512 * 1024,
> +		.mask_flags	= MTD_WRITEABLE,
> +	},
> +	{
> +		.name		= "data",
> +		.offset		= MTDPART_OFS_APPEND,
> +		.size		= MTDPART_SIZ_FULL,
> +	},
> +};
> +
> +static const struct flash_platform_data spi_flash_data = {
> +	.name		= "m25p80",
> +	.parts		= spi_flash_part,
> +	.nr_parts	= ARRAY_SIZE(spi_flash_part),
> +	.type		= "s25fl512s",
> +};
> +
> +static const struct spi_board_info spi_info[] __initconst = {
> +	{
> +		.modalias	= "m25p80",
> +		.platform_data	= &spi_flash_data,
> +		.mode		= SPI_MODE_0,
> +		.max_speed_hz	= 30000000,
> +		.bus_num	= 0,
> +		.chip_select	= 0,
> +	},
> +};
> +
>  static const struct pinctrl_map koelsch_pinctrl_map[] = {
>  	/* DU */
>  	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
> @@ -165,6 +219,11 @@ static const struct pinctrl_map koelsch_pinctrl_map[] =
> { "eth_rmii", "eth"),
>  	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
>  				  "intc_irq0", "intc"),
> +	/* QSPI */
> +	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
> +				  "qspi_ctrl", "qspi"),
> +	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
> +				  "qspi_data4", "qspi"),
>  	/* SCIF0 (CN19: DEBUG SERIAL0) */
>  	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
>  				  "scif0_data_d", "scif0"),
> @@ -190,6 +249,11 @@ static void __init koelsch_add_standard_devices(void)
>  	platform_device_register_data(&platform_bus, "gpio-keys", -1,
>  				      &koelsch_keys_pdata,
>  				      sizeof(koelsch_keys_pdata));
> +	platform_device_register_resndata(&platform_bus, "qspi", 0,
> +					  qspi_resources,
> +					  ARRAY_SIZE(qspi_resources),
> +					  &qspi_pdata, sizeof(qspi_pdata));
> +	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
> 
>  	koelsch_add_du_device();
>  }
-- 
Regards,

Laurent Pinchart