[PATCH v4 1/5] mfd: omap-usb-host: Update DT clock binding information

[Arnd Bergmann]

On Wednesday 08 January 2014 15:57:19 Roger Quadros wrote:
> It is a clock gate defined like so in the DT clock data
> 
> on OMAP4
>         init_60m_fclk: init_60m_fclk {
>                 #clock-cells = <0>;
>                 compatible = "ti,divider-clock";
>                 clocks = <&dpll_usb_m2_ck>;
>                 reg = <0x0104>;
>                 ti,dividers = <1>, <8>;
>         };
> 
> on OMAP5
>         l3init_60m_fclk: l3init_60m_fclk {
>                 #clock-cells = <0>;
>                 compatible = "ti,divider-clock";
>                 clocks = <&dpll_usb_m2_ck>;
>                 reg = <0x0104>;
>                 ti,dividers = <1>, <8>;
>         };
> 
> So you can see that it is the same thing with a different name.

Right, but init_60m_fclk is the name of the clock output of the
divider here, which is /not/ what you should put in the "clock-names"
property of the consumer. The clock input name should reflect what
the clock is used for instead.

	Arnd