[PATCH v2 5/5] ARM: S3C24XX: convert s3c2412 to common clock framework

Heiko Stübner heiko at sntech.de
Sat Feb 22 17:50:15 EST 2014


Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm/mach-s3c24xx/Kconfig         |   8 +-
 arch/arm/mach-s3c24xx/Makefile        |   2 +-
 arch/arm/mach-s3c24xx/clock-s3c2412.c | 761 ----------------------------------
 arch/arm/mach-s3c24xx/common.c        |   9 +-
 arch/arm/mach-s3c24xx/common.h        |   4 +
 arch/arm/mach-s3c24xx/mach-jive.c     |   9 +-
 arch/arm/mach-s3c24xx/mach-smdk2413.c |   9 +-
 arch/arm/mach-s3c24xx/mach-vstms.c    |   9 +-
 arch/arm/mach-s3c24xx/s3c2412.c       |  43 --
 9 files changed, 40 insertions(+), 814 deletions(-)
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2412.c

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 3c351cf..d067f76 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -39,9 +39,10 @@ config CPU_S3C2410
 
 config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
-	depends on SAMSUNG_CLOCK
+	select COMMON_CLK
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
+	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
@@ -363,6 +364,11 @@ config S3C2412_PM_SLEEP
 
 if CPU_S3C2412
 
+config S3C2412_COMMON_CLK
+	bool
+	help
+	  Build the s3c2412 clock driver based on the common clock framework.
+
 config CPU_S3C2412_ONLY
 	bool
 	depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index ba0e547..f254797 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
deleted file mode 100644
index 11b3b28..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben at simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 015e6c0..92a1e3a 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -127,7 +127,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -136,7 +135,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -536,6 +534,13 @@ struct platform_device s3c2443_device_dma = {
 };
 #endif
 
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
 #ifdef CONFIG_CPU_S3C2416
 void __init s3c2416_init_clocks(int xtal)
 {
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index d7323f1..6744739 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -114,6 +114,10 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				unsigned long ext_f, void __iomem *reg_base);
+#endif
 #ifdef CONFIG_S3C2443_COMMON_CLK
 void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
 				    int current_soc,
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 67cb8e9..ac6a468 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
@@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= jive_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index f5bc721..9be3696 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
 static void __init smdk2413_map_io(void)
 {
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2413_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f7ec9c5..d4ebaf4 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline,
 static void __init vstms_map_io(void)
 {
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c2412_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= samsung_timer_init,
+	.init_time	= vstms_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0251650c..99bb867 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
 
 void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
 }
 
 /* need to register the subsystem before we actually register the device, and
-- 
1.8.5.3





More information about the linux-arm-kernel mailing list