[PATCH 08/34] imx-drm: ipu-v3: more clocking fixes

Russell King rmk+kernel at arm.linux.org.uk
Tue Feb 18 15:10:17 EST 2014


There's no point in using the clk API for this; we end up having to
violate the layering this provides.

Acked-by: Philipp Zabel <p.zabel at pengutronix.de>
Acked-by: Shawn Guo <shawn.guo at linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 drivers/staging/imx-drm/ipu-v3/ipu-di.c | 328 ++++++++++----------------------
 1 file changed, 105 insertions(+), 223 deletions(-)

diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-di.c b/drivers/staging/imx-drm/ipu-v3/ipu-di.c
index d766e18bfca0..82a9ebad697c 100644
--- a/drivers/staging/imx-drm/ipu-v3/ipu-di.c
+++ b/drivers/staging/imx-drm/ipu-v3/ipu-di.c
@@ -19,9 +19,6 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
 
 #include "imx-ipu-v3.h"
 #include "ipu-prv.h"
@@ -33,10 +30,7 @@ struct ipu_di {
 	struct clk *clk_di;	/* display input clock */
 	struct clk *clk_ipu;	/* IPU bus clock */
 	struct clk *clk_di_pixel; /* resulting pixel clock */
-	struct clk_hw clk_hw_out;
-	char *clk_name;
 	bool inuse;
-	unsigned long clkflags;
 	struct ipu_soc *ipu;
 };
 
@@ -141,130 +135,6 @@ static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
 	writel(value, di->base + offset);
 }
 
-static int ipu_di_clk_calc_div(unsigned long inrate, unsigned long outrate)
-{
-	u64 tmp = inrate;
-	int div;
-
-	tmp *= 16;
-
-	do_div(tmp, outrate);
-
-	div = tmp;
-
-	if (div < 0x10)
-		div = 0x10;
-
-#ifdef WTF_IS_THIS
-	/*
-	 * Freescale has this in their Kernel. It is neither clear what
-	 * it does nor why it does it
-	 */
-	if (div & 0x10)
-		div &= ~0x7;
-	else {
-		/* Round up divider if it gets us closer to desired pix clk */
-		if ((div & 0xC) == 0xC) {
-			div += 0x10;
-			div &= ~0xF;
-		}
-	}
-#endif
-	return div;
-}
-
-static unsigned long clk_di_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct ipu_di *di = container_of(hw, struct ipu_di, clk_hw_out);
-	unsigned long outrate;
-	u32 div = ipu_di_read(di, DI_BS_CLKGEN0);
-
-	if (div < 0x10)
-		div = 0x10;
-
-	outrate = (parent_rate / div) * 16;
-
-	return outrate;
-}
-
-static long clk_di_round_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long *prate)
-{
-	struct ipu_di *di = container_of(hw, struct ipu_di, clk_hw_out);
-	unsigned long outrate;
-	int div;
-	u32 val;
-
-	div = ipu_di_clk_calc_div(*prate, rate);
-
-	outrate = (*prate / div) * 16;
-
-	val = ipu_di_read(di, DI_GENERAL);
-
-	if (!(val & DI_GEN_DI_CLK_EXT) && outrate > *prate / 2)
-		outrate = *prate / 2;
-
-	dev_dbg(di->ipu->dev,
-		"%s: inrate: %ld div: 0x%08x outrate: %ld wanted: %ld\n",
-			__func__, *prate, div, outrate, rate);
-
-	return outrate;
-}
-
-static int clk_di_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct ipu_di *di = container_of(hw, struct ipu_di, clk_hw_out);
-	int div;
-	u32 clkgen0;
-
-	clkgen0 = ipu_di_read(di, DI_BS_CLKGEN0) & ~0xfff;
-
-	div = ipu_di_clk_calc_div(parent_rate, rate);
-
-	ipu_di_write(di, clkgen0 | div, DI_BS_CLKGEN0);
-
-	dev_dbg(di->ipu->dev, "%s: inrate: %ld desired: %ld div: 0x%08x\n",
-			__func__, parent_rate, rate, div);
-	return 0;
-}
-
-static u8 clk_di_get_parent(struct clk_hw *hw)
-{
-	struct ipu_di *di = container_of(hw, struct ipu_di, clk_hw_out);
-	u32 val;
-
-	val = ipu_di_read(di, DI_GENERAL);
-
-	return val & DI_GEN_DI_CLK_EXT ? 1 : 0;
-}
-
-static int clk_di_set_parent(struct clk_hw *hw, u8 index)
-{
-	struct ipu_di *di = container_of(hw, struct ipu_di, clk_hw_out);
-	u32 val;
-
-	val = ipu_di_read(di, DI_GENERAL);
-
-	if (index)
-		val |= DI_GEN_DI_CLK_EXT;
-	else
-		val &= ~DI_GEN_DI_CLK_EXT;
-
-	ipu_di_write(di, val, DI_GENERAL);
-
-	return 0;
-}
-
-static struct clk_ops clk_di_ops = {
-	.round_rate = clk_di_round_rate,
-	.set_rate = clk_di_set_rate,
-	.recalc_rate = clk_di_recalc_rate,
-	.set_parent = clk_di_set_parent,
-	.get_parent = clk_di_get_parent,
-};
-
 static void ipu_di_data_wave_config(struct ipu_di *di,
 				     int wave_gen,
 				     int access_size, int component_size)
@@ -528,42 +398,58 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 		ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
 }
 
-int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
+static void ipu_di_config_clock(struct ipu_di *di,
+	const struct ipu_di_signal_cfg *sig)
 {
-	u32 reg;
-	u32 di_gen, vsync_cnt;
-	u32 div;
-	u32 h_total, v_total;
-	int ret;
-	unsigned long round;
-	struct clk *parent;
+	struct clk *clk;
+	unsigned clkgen0;
+	uint32_t val;
 
-	dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
-		di->id, sig->width, sig->height);
+	if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
+		/*
+		 * CLKMODE_EXT means we must use the DI clock: this is
+		 * needed for things like LVDS which needs to feed the
+		 * DI and LDB with the same pixel clock.
+		 */
+		clk = di->clk_di;
+
+		if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
+			/*
+			 * CLKMODE_SYNC means that we want the DI to be
+			 * clocked at the same rate as the parent clock.
+			 * This is needed (eg) for LDB which needs to be
+			 * fed with the same pixel clock.  We assume that
+			 * the LDB clock has already been set correctly.
+			 */
+			clkgen0 = 1 << 4;
+		} else {
+			/*
+			 * We can use the divider.  We should really have
+			 * a flag here indicating whether the bridge can
+			 * cope with a fractional divider or not.  For the
+			 * time being, let's go for simplicitly and
+			 * reliability.
+			 */
+			unsigned long in_rate;
+			unsigned div;
 
-	if ((sig->v_sync_width == 0) || (sig->h_sync_width == 0))
-		return -EINVAL;
+			clk_set_rate(clk, sig->pixelclock);
 
-	dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
-		clk_get_rate(di->clk_ipu),
-		clk_get_rate(di->clk_di),
-		sig->pixelclock);
+			in_rate = clk_get_rate(clk);
+			div = (in_rate + sig->pixelclock / 2) / sig->pixelclock;
+			if (div == 0)
+				div = 1;
 
-	/*
-	 * CLKMODE_EXT means we must use the DI clock: this is needed
-	 * for things like LVDS which needs to feed the DI and LDB with
-	 * the same pixel clock.
-	 *
-	 * For other interfaces, we can arbitarily select between the DI
-	 * specific clock and the internal IPU clock.  See DI_GENERAL
-	 * bit 20.  We select the IPU clock if it can give us a clock
-	 * rate within 1% of the requested frequency, otherwise we use
-	 * the DI clock.
-	 */
-	round = sig->pixelclock;
-	if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
-		parent = di->clk_di;
+			clkgen0 = div << 4;
+		}
 	} else {
+		/*
+		 * For other interfaces, we can arbitarily select between
+		 * the DI specific clock and the internal IPU clock.  See
+		 * DI_GENERAL bit 20.  We select the IPU clock if it can
+		 * give us a clock rate within 1% of the requested frequency,
+		 * otherwise we use the DI clock.
+		 */
 		unsigned long rate, clkrate;
 		unsigned div, error;
 
@@ -578,54 +464,80 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 
 		/* Allow a 1% error */
 		if (error < 1010 && error >= 990) {
-			parent = di->clk_ipu;
+			clk = di->clk_ipu;
+
+			clkgen0 = div << 4;
 		} else {
-			parent = di->clk_di;
+			unsigned long in_rate;
+			unsigned div;
+
+			clk = di->clk_di;
 
-			ret = clk_set_rate(parent, sig->pixelclock);
-			if (ret)
-				dev_err(di->ipu->dev, "Setting of DI clock failed: %d\n", ret);
+			clk_set_rate(clk, sig->pixelclock);
 
-			/* Use the integer divisor rate - avoid fractional dividers */
-			round = rate;
+			in_rate = clk_get_rate(clk);
+			div = (in_rate + sig->pixelclock / 2) / sig->pixelclock;
+			if (div == 0)
+				div = 1;
+
+			clkgen0 = div << 4;
 		}
 	}
 
-	ret = clk_set_parent(di->clk_di_pixel, parent);
-	if (ret) {
-		dev_err(di->ipu->dev,
-			"setting pixel clock to parent %s failed with %d\n",
-				__clk_get_name(parent), ret);
-		return ret;
-	}
+	di->clk_di_pixel = clk;
+
+	/* Set the divider */
+	ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
 
 	/*
-	 * CLKMODE_SYNC means that we want the DI to be clocked at the
-	 * same rate as the parent clock.  This is needed (eg) for LDB
-	 * which needs to be fed with the same pixel clock.
-	 *
-	 * Note: clk_set_rate(clk, clk_round_rate(clk, rate)) is the
-	 * same as clk_set_rate(clk, rate);
+	 * Set the high/low periods.  Bits 24:16 give us the falling edge,
+	 * and bits 8:0 give the rising edge.  LSB is fraction, and is
+	 * based on the divider above.  We want a 50% duty cycle, so set
+	 * the falling edge to be half the divider.
 	 */
-	if (sig->clkflags & IPU_DI_CLKMODE_SYNC)
-		round = clk_get_rate(parent);
+	ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
 
-	ret = clk_set_rate(di->clk_di_pixel, round);
+	/* Finally select the input clock */
+	val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
+	if (clk == di->clk_di)
+		val |= DI_GEN_DI_CLK_EXT;
+	ipu_di_write(di, val, DI_GENERAL);
 
-	dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, got %luHz\n",
+	dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
 		sig->pixelclock,
 		clk_get_rate(di->clk_ipu),
 		clk_get_rate(di->clk_di),
-		parent == di->clk_di ? "DI" : "IPU",
-		clk_get_rate(di->clk_di_pixel));
+		clk == di->clk_di ? "DI" : "IPU",
+		clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
+}
+
+int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
+{
+	u32 reg;
+	u32 di_gen, vsync_cnt;
+	u32 div;
+	u32 h_total, v_total;
+
+	dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
+		di->id, sig->width, sig->height);
+
+	if ((sig->v_sync_width == 0) || (sig->h_sync_width == 0))
+		return -EINVAL;
 
 	h_total = sig->width + sig->h_sync_width + sig->h_start_width +
 		sig->h_end_width;
 	v_total = sig->height + sig->v_sync_width + sig->v_start_width +
 		sig->v_end_width;
 
+	dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
+		clk_get_rate(di->clk_ipu),
+		clk_get_rate(di->clk_di),
+		sig->pixelclock);
+
 	mutex_lock(&di_mutex);
 
+	ipu_di_config_clock(di, sig);
+
 	div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
 	div = div / 16;		/* Now divider is integer portion */
 
@@ -709,7 +621,11 @@ EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
 
 int ipu_di_enable(struct ipu_di *di)
 {
-	int ret = clk_prepare_enable(di->clk_di_pixel);
+	int ret;
+
+	WARN_ON(IS_ERR(di->clk_di_pixel));
+
+	ret = clk_prepare_enable(di->clk_di_pixel);
 	if (ret)
 		return ret;
 
@@ -721,6 +637,8 @@ EXPORT_SYMBOL_GPL(ipu_di_enable);
 
 int ipu_di_disable(struct ipu_di *di)
 {
+	WARN_ON(IS_ERR(di->clk_di_pixel));
+
 	ipu_module_disable(di->ipu, di->module);
 
 	clk_disable_unprepare(di->clk_di_pixel);
@@ -776,13 +694,6 @@ int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
 		u32 module, struct clk *clk_ipu)
 {
 	struct ipu_di *di;
-	int ret;
-	const char *di_parent[2];
-	struct clk_init_data init = {
-		.ops = &clk_di_ops,
-		.num_parents = 2,
-		.flags = 0,
-	};
 
 	if (id > 1)
 		return -ENODEV;
@@ -804,45 +715,16 @@ int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
 	if (!di->base)
 		return -ENOMEM;
 
-	di_parent[0] = __clk_get_name(di->clk_ipu);
-	di_parent[1] = __clk_get_name(di->clk_di);
-
 	ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
 
-	init.parent_names = (const char **)&di_parent;
-	di->clk_name = kasprintf(GFP_KERNEL, "%s_di%d_pixel",
-			dev_name(dev), id);
-	if (!di->clk_name)
-		return -ENOMEM;
-
-	init.name = di->clk_name;
-
-	di->clk_hw_out.init = &init;
-	di->clk_di_pixel = clk_register(dev, &di->clk_hw_out);
-
-	if (IS_ERR(di->clk_di_pixel)) {
-		ret = PTR_ERR(di->clk_di_pixel);
-		goto failed_clk_register;
-	}
-
 	dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
 			id, base, di->base);
 	di->inuse = false;
 	di->ipu = ipu;
 
 	return 0;
-
-failed_clk_register:
-
-	kfree(di->clk_name);
-
-	return ret;
 }
 
 void ipu_di_exit(struct ipu_soc *ipu, int id)
 {
-	struct ipu_di *di = ipu->di_priv[id];
-
-	clk_unregister(di->clk_di_pixel);
-	kfree(di->clk_name);
 }
-- 
1.8.3.1




More information about the linux-arm-kernel mailing list